Is it safe to use Molex to SATA adapter?

Is it safe to use Molex to SATA adapter?

Molex to SATA adapter cables are a very simple and cost-effective alternative to buying a new power supply. However, they can be a dangerous alternative to getting a quality power supply, potentially damaging your SSD, internal components, and may also pose a fire risk in your home.

Can I use Molex to power HDD?

Regarding your original question though, if the psu has 4pin molex plugs it’s fine to use. The hdd can use either.

What are Molex 4 pin connectors for?

The Molex 4-pin power supply connector is one of the standard peripheral power connectors in computers today. This power connector is the standard connector for all PATA based hard drives, many high-end video cards, and some older optical drives and other internal devices.

What is the Molex connector on a motherboard for?

Certain Molex connectors are used for providing power to the motherboard, fans, floppy disk drive, CD/DVD drive, video card, some older hard drive models, and more. Compatible connectors are available from many manufacturers, not just Molex and AMP.

Is SATA better than Molex?

Technically Molex can carry much more power than the SATA power connector. Molex has 2 power pins (one 5V and on 12V pin), each can deliver 11Amps for a total of 22Amps. The other 2 pins are ground wires… SATA power connectors has a total of 15 pins of which 9 are power pins (3 x 3.3V, 3 x 5V, 3 x 12V).

Is Molex better than SATA?

Is Molex still used?

It can be used to power fans, hard drives, etc. Now, people mostly use SATA Power connectors instead of molex; however, molex is still widely used.

How many watts can Molex handle?

54 watts
The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector. Some PCIe risers do not conform to ATX specifications.

How much power can a Molex supply?

The ATX standard for SATA or Molex connections is rated for 54 watts. Each SATA/Molex connector provides three 12v pins at 1.5 amps each, for a total of 4.5 amps. 12 volts, times 4.5 amps, equals 54 watts able to be provided by a SATA/Molex connector.

Why is Molex bad?

Why is molex good for bad. One of the big reasons against molex is that, even though there is the notch that’s supposed to prevent you from plugging the connector the wrong way around, it’s still possible to plug it far enough in for the pins to make contact, sending 12V on the 5V rail and vice versa.

What’s are the voltages of SATA power cable?

The SATA standard specifies a power connector sharply differing from those used by PATA drives and many other computer components. It is wafer-based, 15-pin shape. The seemingly large number of pins are used to supply three different voltages – 3.3 V, 5 V, and 12 V . Each voltage is supplied by three pins ganged together (and 5 pins for ground).

Are there different SATA cables?

There are three main types of hard drive data cables: IDE/PATA, SATA and SCSI .

What is a SATA power connector?

The SATA 15-pin power supply connector is one of the standard peripheral power connectors in computers. It’s the standard connector for all SATA-based hard drives and optical drives. SATA power cables protrude from the power supply unit and are meant to reside only inside the computer case.