Is okoume plywood marine grade?
Is okoume plywood marine grade?
Okoume wood is typically a high-quality product coming in 4′ x 8′ two-sided marine grade panels in thicknesses ranging from ⅛” to 1”. It is very soft and plywood made from Okoume are usually not pressure treated. The core can be made from pine, poplar, or hardwood to give it added strength.
Is Okoume mahogany?
Another is a wood known as okoume (sometimes known as gabon from its main country of origin). This wood is softer, and leans toward the warmer side of the classic mahogany tone. Because it is softer, okoume often is used as a laminate, giving it additional rigidity.
Is Okoume a hardwood?
Okoume is an African tropical hardwood with large pores & a light reddish-brown color hue. Its trees grow fast and tall. This wood most commonly used as a plywood veneer. However, guitar builders, furniture manufacturers , racing boat builders and woodworkers now use Okoume lumber as a low-cost mahogany substitute.
What kind of wood is okoume?
Aucoumea klaineana
This is the commercial name for timber that comes from the tree Aucoumea klaineana, an African hardwood also known as “Gaboon” or alternately “Angouma.” It has been widely used throughout Europe over the past century.
What is Okoume marine plywood?
Okoume marine plywood is lightest in weight among marine plywood products available. Okoume is strong and easy to work with for tooling. It has moderate resistance to rot and mildew. It is used for hull and deck components, bulk heads, and hatches, where weight is an important factor.
What is Okoume wood similar to?
On the Janka scale, a standard measure of wood hardness, Okoume’s rating is only 380. This is similar to the hardness of basswood (367) and redwood (402). Wood used for hardwood flooring is generally from much harder species such as red oak, which has a hardness of 1290.
Is Okoume porous?
The heartwood of okoume ranges from pale pink to light brown. It’s a diffuse-porous wood with relatively large pores and a medium texture.
What is Okoume mahogany veneers?
Veneer Description Okoume has the color of cherry, the grain of mahogany, and the approximate weight of balsa. The species name is Aucoumea klaineana. The tree is from Ghana in Africa. These veneer sheets are non-sequential but there is little color variation from one sheet to the next.
What is the lightest marine plywood?
Okoume marine plywood
Okoume marine plywood is lightest in weight among marine plywood products available. It has the best strength to weight ratio. Okoume is strong and easy to work with for tooling. It has moderate resistance to rot and mildew.
What is Gaboon wood?
Gaboon Ebony is an exotic wood native to Western Africa. It is an extremely hard, dense, and heavy wood, with a very fine texture. The sapwood is pink to pale red-brown in color, while the heartwood is a uniform jet-black or black-brown streaked.
What is the difference between African mahogany and genuine mahogany?
The main difference between African mahogany and its South American counterpart is the wood’s color variation, often appearing as a series of light and dark bands or as a ribbon figure. The African species occasionally has interlocked grain, making it more difficult to work with than genuine mahogany.
What is okoume wood?
Okoume wood is typically a high-quality product coming in 4’ x 8’ two-sided marine grade panels in thicknesses ranging from ⅛” to 1”. It is very soft and plywood made from Okoume are usually not pressure treated. The core can be made from pine, poplar, or hardwood to give it added strength. A cubic foot of Okoume weights over 25 pounds.
What is okoume mahogany?
Aucoumea klaineana, or Okoume, is an African hardwood that can only be found in the Congo, Gabon, and Africa’s equatorial Guinea. The tree grows in close stands and can reach over 100 feet. It also grows quickly so regeneration is usually not a concern. The name Okoume Mahogany is a misnomer, because it’s not true mahogany.
Is okoume plywood pressure treated?
It is very soft and plywood made from Okoume are usually not pressure treated. The core can be made from pine, poplar, or hardwood to give it added strength. A cubic foot of Okoume weights over 25 pounds. Okoume is primarily used for marine applications, but it can be used for other applications as long as the edges and faces are well sealed.
What is okoume veneer?
The veneer mill has to be in Gabon where it can benefit the local economy. No more than 7 percent of Joubert’s Okoume can be taken annually in order to ensure sustainability. Okoume wood is typically a high-quality product coming in 4’ x 8’ two-sided marine grade panels in thicknesses ranging from ⅛” to 1”.
