Is the M52B28 reliable?

Is the M52B28 reliable?

The transmissions on these cars are also very strong and reliable, although you might start to experience some issues above the 150k mark. Maintenance is key. BMW transmission oil is supposed to be “lifetime” but I recommend replacing this every 100k miles, especially on a vehicle this age.

What BMW uses the M50 engine?

The BMW M50 engine is the successor to the M20, and predecessor to the M52 engine. The M50 was used solely in the E34 520i and 525i, and the E36 320i and 325i. It is a straight six, or inline-6, coming in at either 2.0L (M50B20) or 2.5L (M50B25).

How much HP can a M50 take?

In stock form they can withstand roughly 400 horsepower, and with some internal work, over 600 is possible, as is the case with Josh King’s mighty 650hp M50 turbo.

How much boost can a stock M52B28 handle?

With the M52/M54`s high static compression ratio and stock internals, you`re limited to 6 or 7 psi of boost (if you want the motor to last more than a couple of runs), which on a 3-liter motor equates to maybe 80 or 90 RWHP.

Do all E36 have vanos?

VANOS was introduced half way through 1993. (the M50TU engine) Officially on all 6-cyl e36’s in 1994. Early e36’s did not have VANOS, which isn’t necessarily a bad thing… it’s more desired for those wanting to boost their engine, and some find the engine more rev-happy.

How much HP can M50 handle?

What is the horsepower of a M52B28 engine?

M52B28 (1995 – 2000) is a basic engine modification. Specifications are as follows: compression ratio – 10.2, power – 193 HP at 5,300 rpm, 280 Nm of torque at 3,950 rpm. 2. M52TUB28 (1998 – 2001) Double-Vanos engine on both shafts.

What is the horsepower of a BMW M50B25 engine?

The M50B25 engine produced 192 PS (141 kW; 189 HP) at 6,000 rpm of maximum output power and 245 N·m (25 kg·m, 180.6 ft·lb) at 4,700 rpm of peak torque. The BMW M50B25 engine has a cast-iron cylinder block, bore is 84.0 mm (3.31 in) and stroke is 75.0 mm (2.95 in). The compression ratio rating is 10.0:1.

What kind of engine does a m50tub25 have?

M50TUB25 (M50TU) (1992 – 1996) is a new version of engine equipped by updated system of variable valve timing on Vanos inlet valves and new camshafts with the following specs: duration 228/228 deg, lift – 9/9 mm. Specifications are as follows: compression ratio – 10.5, power – 192 HP at 5,900 rpm, 245 Nm of torque at 4,200 rpm. 1. Overheating.

What is the difference between M54B30 and M52B28 engines?

M54B30 engine replaced its predecessor in 2001 and production of was stopped. 1. M52B28 (1995 – 2000) is a basic engine modification. Specifications are as follows: compression ratio – 10.2, power – 193 HP at 5,300 rpm, 280 Nm of torque at 3,950 rpm.

author

Back to Top