Is there a standard for cabinet hardware?
Is there a standard for cabinet hardware?
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
Where do Shaker cabinet hardware go?
Cabinets. For 5-piece cabinets (like a Shaker or any style that isn’t one flat slab of wood), the traditional placement is to center the knob in the corner of the face frame, so that the knob is in the center of both the vertical and horizontal frame pieces.
How long should bar pulls?
Bar Pulls are traditionally measured center-to-center and they should not exceed 1/3 of the length of a cabinet door or width of a drawer. Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall.
Where do pulls go on slab cabinet doors?
When it comes to installing cabinet door handles (either knobs or pulls), they are always placed on the opposite side from the door hinges. You’ll specifically want to place them anywhere between 1” and 4” from the top or bottom edge of the door.
Where should kitchen cabinet knobs be placed?
Cabinet knobs are placed opposite of door hinges. On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. If your drawer is 24” or wider, you may choose to place a second knob.
What are the different types of cabinet hardware?
Here are the most common types: Traditional: Traditional hardware has a more ornate and classic look. Contemporary: With clean lines and a sharp, minimalistic look, contemporary (or modern) cabinet hardware is simple and understated. Transitional: Combining traditional and modern cabinet hardware, transitional allows you to mix elements of both styles for a personalized look.
What is the proper placement of cabinet handles?
Upper Cabinet Placement. On upper cabinets, handles usually go in the lower corners so they are easy to reach. Most people attach cabinet pulls or handles to the stile. A good rule of thumb is to center the hardware horizontally on the stile. That means it attaches roughly in the middle of the stile.
Where should cabinet handles/knobs be placed?
Proper Kitchen Cabinet Knob Placement Upper Cabinet Placement. Before getting into specific placement, it’s important to know a little cabinet terminology. Lower Cabinet Placement. Lower cabinet pull or knob placement is similar to upper cabinet’s. Drawer Placement. Centering knobs or pulls on the drawer front is usually the best option. Tips for Placement.
How to install cabinet hardware?
Insert the fastening screw (s) through the backside of the hole.
