What are legal axle weights in California?

What are legal axle weights in California?

General Rule. 35550. (a) The gross weight on any one axle shall not exceed 20,000 pounds, and the gross weight upon any one wheel, or wheels, supporting one end of an axle, shall not exceed 10,500 pounds.

How much weight can an axle carry?

In addition to Bridge Formula weight limits, Federal law states that single axles are limited to 20,000 pounds, and axles spaced more than 40 inches and not more than 96 inches apart (tandem axles) are limited to 34,000 pounds. Gross vehicle weight is limited to 80,000 pounds (23 U.S.C. 127).

Are spread axles legal in California?

A CA spread axle is also referred to as a CA – FL legal spread. It refers to the distance from the king pin to the center of the rear axle. CA & FL require that distance to be 41 feet. A traditional spread axle is longer than 41 feet from these two points.

How much weight can a 3500 lb axle hold?

The carrying capacity of two 3,500 pound axles is 7,000 pounds. The axles support not only the cargo’s weight but also the weight of the trailer’s frame and body.

Where can the axle weight limits be found?

Explanation: Individual axle weights are shown on the vehicle plate. This can be found in a prominent place on both the vehicle and trailer.

Are tri axle trailers allowed in California?

Tridem Axles: 51,450 pounds with 9′-0” axle spacing, 8-foot width, 4 tires per axle. 52,500 pounds with 10′-0” axle spacing 8-foot width, 4 tires per axle. Note (1): The maximum allowable axle spacing for tridem axles is 10′-4′.

How much weight can a spread axle trailer hold?

A spread axle trailer can carry 40,000 lbs on the spread axles allowing for more leeway in placing a heavier load. The spread of the two axles is 10’2″ counting them as two separate axles that can each carry 20k lbs. This gives you a legal limit of 86k lbs of all axles.

What is max axle weight?

The shorter the distance between front and rear axles and the fewer the axles, the lower the weight permitted per axle. The maximum allowable weight is 34,000 pounds for a tandem axle and 20,000 pounds for a single axle.

What is dot weight limit per axle?

Federal weight limits are 20,000 pounds per single axle, 34,000 pounds per tandem axle and a gross vehicle weight of 80,000 pounds, the DOT notes.

What is the weight limit for a 40 foot container?

As a general rule, the gross weight for 40-foot transportation should be less than 80,000 lbs, resulting in a cargo weight of roughly 45,000 lbs. Refrigerated cargo weight in 40-foot containers should be between 39,000 and 40,000 lbs, with cargo weight under 80,000 lbs gross weight.

What is the weight limit for trucks in California?

If it is greater than 4 feet, it can have up to 34,000 pounds, plus 1,000 pounds for every additional foot extra span between axles, though the total weight can’t exceed 40,000 pounds. Trucks with three axles have a maximum weight limit of 48,000 pounds.

author

Back to Top