What are the correct settings on a New England pellet stove?
What are the correct settings on a New England pellet stove?
The first button is the “Lower Fuel Feed” (LFF), second is the “Low Burn Air” (LBA) and the third is “Air On Temp” (AOT). These buttons control how the pellet stoves operates. The factory settings are 6 on the LFF, 4 on the LBA and 1 on the AOT.
What does e mean on a pellet stove?
Error codes are alpha-numeric codes that appear on the control board and indicate a fault within your pellet stove. Code “E-2” indicates a failure to light, code “E-3” is known as over-firing and indicates that the exhaust temperature has been exceeded and code “E-4” signifies a drop in exhaust temperature.
How do I increase the airflow in my pellet stove?
Pull out on the handle or rod slowly if you have a tall, slow burning flame. Pulling the handle out from the stove increases the amount of air inside the stove. Continue to pull out on the handle until you’re satisfied with the amount of air inside the stove, and the flames burn normally.
What does low burn air mean?
A low-burning, flickering orange flame, known as a “lazy” flame, is not hot enough to be efficient. A lazy flame usually has black tips or emits dark black smoke. This kind of flame needs more air for the pellet stove to be efficient.
How do you adjust the air on a pellet stove?
How to Adjust the Air Intake for a Pellet Stove
- Observe the flames inside your wood pellet stove.
- Look for the damper handle or damper rod on your stove.
- Push in on the handle or rod slowly if you have a quick burning, short flame.
- Pull out on the handle or rod slowly if you have a tall, slow burning flame.
What setting should I run my pellet stove on?
It is best to run the appliance on the lower heat settings like 2 or 3 rather than up at 4 or 5. The higher heat settings result in lower efficiency and the appliance cycling from high to pilot fire too often.
What does E2 mean on a New England pellet stove?
When starting the unit, there is no need to place any fuel into the burn pot before lighting; the unit will allow itself enough fuel to sufficiently start. If the unit does not feed any fuel into the burn pot, there will be no fire and an E-2 code should appear.
What does 5u mean on a pellet stove?
This is normal and indicates that the stove is in Start Up mode. If proof of fire is not made by the end of that period the stove automatically shuts down.
