What are the dimensions of a dartboard cabinet?

What are the dimensions of a dartboard cabinet?

Cabinet dimensions are 37″ x 30.25″ x 7.25″.

How far apart should dartboard be?

Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.

What makes a good dartboard?

When it comes to popular opinion, the consensus on the best dartboard is pretty accurate. In general, the most common dartboard you’ll see is a bristle/sisal dartboard, with thin, bladed wiring and a bladed bullseye. There are other components that matter -and I’ll go into all of them- but those are the most important.

How do you make a magnetic dartboard at home?

Steps:

  1. Swap out your dartboard with a styrofoam board, which you can buy pre-made or DIY one with a block of styrofoam, a stencil of a dartboard, and a sharpie.
  2. Stack as many ring magnets on the cylinder magnet until it’s almost, but not completely encompassing the cylinder, as you want some of it to be visible.

What height should a dartboard be in CM?

Other Dartboard Set-ups

Board Centre Bull to Ground Ground level to Oche
Standard 5′ 8″ = 173 cm 7′ 9 ¼” = 237 cm
Standard (Whellchair) 4′ 6″ = 137 cm 7′ 9 ¼” = 237 cm
Soft-tip 5′ 8″ = 173 cm 8′ 0″ = 244 cm
London Fives (Narrow Fives)* 5′ 6″ = 168 cm 9′ 0” = 274.3 cm

How to set up a dart board?

To set up a dart board correctly, make sure the dart board is rotated so that the 20 segment is at the very top. Then, fix the dart board to the wall so that the center of the bullseye is 173cm (5ft 8in) from the ground. To set up the oche , you should measure 293.4cm (9ft 7½in) diagonally back from the center of the bullseye to the floor.

How to choose the best dart board?

How to Choose the Best Electronic Dart Board on the Market Design of the Board. Over a long time, darts has remained a topic in debate contending whether it is a sport. Factors to Consider When Buying an Electronic Dart Board. There are different factors that you should consider when you want to buy an electronic dartboard. Power Source and Other Features. Pricing.

How high should a dart board be mounted?

The regulation height of a dart board for both soft-tip and steel-tip play is 5 feet 8 inches from the floor to the center of the bulls-eye. The board must be mounted flush to the wall with the “20” at the top, according to Dart Brokers.

How to hang a dart board?

Find a stud around the wall you’ve chosen using a stud finder.

  • Measure 68 inches up from the floor to the wall where the stud is located.
  • Hold the bracket in the marked spot,open side-up.
  • Mark pilot holes through the bracket holes with a pencil.
  • Remove the bracket and slightly drill pilot holes on the marks.
  • author

    Back to Top