What are the physical and mechanical properties of aluminum?
What are the physical and mechanical properties of aluminum?
Pure aluminium is soft, ductile, corrosion resistant and has a high electrical conductivity. It is widely used for foil and conductor cables, but alloying with other elements is necessary to provide the higher strengths needed for other applications.
What are the special properties of aluminium?
It has low density, is non-toxic, has a high thermal conductivity, has excellent corrosion resistance and can be easily cast, machined and formed. It is also non-magnetic and non-sparking. It is the second most malleable metal and the sixth most ductile.
What properties of aluminum make aluminum foil useful in baking food?
Because aluminium foil is malleable and will fold and wrap close to the food being stored, it is an ideal material for irregularly shaped items such as the remainder of meat joints etc. The deadfold characteristic of the metal allows the foil to be sealed by folding and without the need for any tie or tape.
What are the properties of 2014 aluminium alloy?
Typical material properties for 2014 aluminium alloy are: Density: 2.80 g/cm 3, or 175 lb/ft 3. Young’s modulus: 73 GPa, or 11 Msi. Electrical conductivity: 34 to 50% IACS. Ultimate tensile strength: 190 to 480 MPa, or 28 to 70 ksi. 2014 aluminium alloy is discussed in the following standards:
What is the heat treatment for aluminium 2014 Alloy?
Aluminium / Aluminum 2014 alloy is heat treated at 502°C (935°F) and then water quenched. T4 temper is produced as a result of this heat treatment.
What is 2014a aluminium?
2014A is an alloy of aluminium that is very similar (but not entirely identical) to 2014. Because of the naming similarity, the two can be confused. The alloy composition of 2014A is:
What is the welding process for Aluminium / aluminum 2014 Alloy?
Filler rods of either 2017 alloy or 2014 alloy are used in the welding process. Fixturing is arranged for minimum strength as this alloy is subject to cracking during the welding process. Aluminium / Aluminum 2014 alloy can be forged between 399 and 454°C (750 and 850°F). Conventional methods are used for forming Aluminium / Aluminum 2014 alloy.
