What are the safety rules for using a pillar drill?
What are the safety rules for using a pillar drill?
Sign Text: HEALTH AND SAFETY NOTICE USE OF PILLAR DRILL MACHINE 1) ENSURE YOU WEAR GOGGLES AND GLOVES. 2) CHECK GUARD IS FITTED TO DRILL AND IN PLACE. 3) CHECK SECURITY OF DRILL AND REPORT AND DAMAGE OR BROKEN PARTS. 4) CHECK YOU KNOW WHERE TO EMERGENCY STOP IS FITTED.
What PPE must be worn when using a pillar drill?
Personal Protective Equipment and Clothing Hearing protection must be worn. Dust mask or other appropriate respiratory protection must be worn Close fitting/protective clothing must be worn. Rings and jewellery must not be worn.
Can a pillar drill drill metal?
Pillar drill is the best for metal When working with hard materials, it is important to get the drill holes in the correct angle. The pillar drill machine is recommended over conventional drill machines.
How is a pillar drill used?
Pillar drills are free-standing machines that use a motor to rotate a bit with variable speed range. The drill press can be used to cut holes of different diameters into different types of material such as wood or metal.
Do drill presses need to be guarded?
OSHA 29 CFR 1910.212(a)(1) requires that one or more methods of drill press machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks.
What always should be removed before operating a drill press?
Remove the chuck key before starting the drill press.
What are the disadvantages of a pillar drill?
Long hair, loose clothing etc, can become entangled in moving parts of the drilling machine.
- Chuck keys, broken drills, swarf, work pieces, etc, can be violently ejected.
- Unexpected spinning of hand held work pieces could cause injuries to hands.
- The drill table can slip down or heavy objects fall from the table.
What are the advantages of using a pillar drill?
Using a pillar drill, standard drilling is not only quicker, but also more precise than with a hand-held drill. With some models, the drill table can not only be moved up and down, but even in different angles (radially). With some home-made accessories there are a variety of different processing options.
What are pillar drills made of?
Key Features of a Pillar Drill The machines are relatively simple and are centred around a substantial steel column; onto one end is attached the motor, drive belt system and chuck. The other end of the column is securely located into a heavy cast iron base and between the two is the horizontal table.
What are 20 safety rules you should follow when using the drill press?
Drill Press Safety Rules
- Run drill at correct RPM for diameter of drill bit and material.
- Always hold work in a vise or clamp to the drill table.
- Use a correctly ground drill bit for the material being drilled.
- Use the proper cutting fluid for the material being drilled.
- Remove chips with a brush, never by hand.
