What car uses 5×108?

What car uses 5×108?

Steel Wheels with 5×108 bolt pattern are suitable for many cars and the most common are: Ford Focus, Mondeo, Kuga, C-Max, S-Max, Galaxy, Renault Laguna, Peugeot 407, Citroen C5 III, Volvo C30, S40, V50, S60, V60, C70, V70, S80, off-road Volvo XC60 and XC70, Land Rover Freelander II, Citroen Jumpy, Fiat Scudo, Peugeot …

What bolt pattern is 5×108?

The 5×108 bolt pattern in a 17″ wheel size is common on the 5-lug Ford Escape, new Bronco Sport, C-Max, Edge, Focus, Fusion, and Transit Connect; Lincoln MKC, Nautilus, Continental, and Corsair; and Volvo XC40, XC90, XC70, XC60, V90, V60, S90, S80, S60, and S40.

Does 4×108 fit 4×100?

Q: My bolt pattern is 4×100 and the wheel i want to put on my car are 4×108 will these fit? A: Yes. These are the correct adapters for your 4×100 car and use you 4×108 wheels!

Is 4×108 the same as 4×4 25?

And for those drivers who think in standard measurements, if you’re wondering, “is 4×108 the same as 4×4. 4×108 is just the metric variant of the standard 4×4. 25 bolt pattern.

What is the bolt pattern for a Ford Fusion?

The bolt pattern for a ford fusion is pcd 5×108 (5×4. 25) .

Is 4×100 the same as 4×4 bolt pattern?

I’m fairly sure that when he says 4×4 he means 4 bolt by 4″ PCD, rather than 4 wheel drive….4×100 vs 4×4.

surprisingskoda Probably posted too much Posts: 10,758 surprisingskoda @surprisingskoda
Or he could mean a Golf Country/Synchro, or BMW 325iX, those are 4×100 4x4s…

What wheels fit 4 x 108 bolt pattern?

The 4 X 108 bolt pattern is common to FORD, MERCURY, SAAB, AUDI, VOLVO, PORSCHE, PEUGEOT, ALFA ROMEO and OLDSMOBILE vehicles. A full list of vehicle makes and models appears below. Note: Alloy wheels should always be installed using a torque wrench ensuring proper mount. Check your vehicle owner manual for proper specifications.

What size is a 5 lug bolt pattern?

A bolt circle of 5 x 4.5 would indicate a 5 lug bolt pattern on a circle with a diameter of 4.5 inches. There are four important measurements that are used to categorize and identify a wheel for fitment purposes. Rim Diameter The actual diameter of the wheel at the point where the tire bead seats ( NOT the outer lip of the rim).

What is the most popular size of 5×108 wheel?

One of the most popular sizes out there is an 18-inch 5×108 wheel. And we know some of you are hunting for a set of 17-inch 5×108 wheels, which we’ve got in stock as well. What cars have a 5×108 bolt pattern? If you’ve found yourself asking, “What cars have 5×108 wheels?” you’re in the right spot!

What size lug nuts do I need for my Wheels?

General recommendations by stud size in Ft/Lbs: 12mm = 70-80, 7/16 = 55-65, 1/2 = 75-85, 14mm = 85-95, 9/16 = 95-115, 5/8 = 135-145 It is prudent to re-torque wheels after about 60 to 90 miles (100km to 150km) of driving. Learn more about lug nuts and torque.

author

Back to Top