What do I need to build a 12×24 deck?

What do I need to build a 12×24 deck?

Things You’ll Need

1. Concrete mix bags.
2. 4 x 4 x 8 foot pressure-treated posts.
3. 6 pressure-treated boards, 2 x 8 x 8 foot.
4. 4 pressure-treated boards, 2 x 8 x 12 foot.
5. 2 x 6 pressure-treated boards (length will depend on width of deck)
6. 2 x 6 x 12 foot pressure-treated boards.

Which direction should deck boards run?

On most decks, the decking boards run parallel to the house and across the joists (either perpendicular or at a 45 degree angle).

Where do you start when building a deck?

1. Step 1: Attach the Ledger. Photo by David Carmack.
2. Step 2: Protect the Ledger.
3. Step 3: Set Footings and Piers.
4. Step 4: Install Post Bases and Side Rim Joists.
5. Step 5: Install Front Rim Joist, Beams, and Interior Joists.
6. Step 6: Install Front Rim Joist, Beams, and Interior Joists (continued)
7. Step 7: Attach Trim and Decking.

Is there an app for designing a deck?

Trex AR Visualizer Mobile App Compatible with iOS devices, this free app offers basic design features on mobile to create a custom deck from anywhere. Note: Trex, a decking materials company, created this app, meaning it offers only Trex decking and railing options. It works well for those who plan to use the brand.

Do you need joist hangers for a floating deck?

2 Answers. You don’t need joist hangers. Joist hangers are for use in spots where you’re unable to put the nails directly through the frame into the joist already.

What size wood should I use to build a deck?

For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface. Cedar 1x lumber usually has one rough side and one smooth side.

How to build a 12X16 deck?

Measurements and Initial Framework. To measure out your deck and determine your footings,you will need batterboards and mason’s string.

Concrete for Footings. As part of the initial framework when building your deck,you will need to purchase concrete to secure your footings in their holes.

The Deck Floor.

Railings and Stairs.

Hardware.

How to build a simple deck?

Attach the Ledger. Remove the building’s trim and siding to 1 foot above the top of where the ledger will sit.

Protect the Ledger. Cut a strip of self-adhering waterproof membrane 6 inches wide and the same length as the ledger.

Set Footings and Piers.

Install Post Bases and Side Rim Joists.

Install Front Rim Joist,Beams,and Interior Joists.

How to build a ground level deck?

Planning and Design Consider where you’d like to put your platform deck by imagining how you’ll use it and assessing your terrain.

What Type of Material Will You Use? A ground level deck is meant to be low,which means you’ll want to consider the type of wood or composite

Consider Ground Level Deck Ventilation The ground under a platform deck will get wet.

Plan the Foundation and Leveling You can create a simple foundation by placing concrete blocks at the deck’s corners.

Lay the Beams Lay the deck beams on top of the concrete blocks,making sure they’re high enough to allow for ventilation,as previously mentioned.

Attach Anchors/Joists Once your beams are level,attach angle brackets at the corners of the deck where joists and beams meet.

Attach Inner Joists Using joist hangers,fasten the joists into the beam faces at regular intervals. Make sure to use the recommended spacing from the decking manufacturer.

Lay the Decking Finally,your decking is starting to take shape and resemble the structure you’ve envisioned.

Trim the Edges Once your decking is installed,use a circular saw to trim any overhang,making your decking neat and even.

Add Steps or Stairs If you want steps for your ground level deck,then you will need to decide on how many and how you’ll build them.

Enjoy Your Deck