What do the symbols on HP LaserJet P2015 mean?
What do the symbols on HP LaserJet P2015 mean?
The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status….HP LaserJet P2015 Series Printer – Control panel overview.
| 1 | Jam light: Indicates that there is a jam in the printer. |
|---|---|
| 5 | Ready light: Indicates that the printer is ready to print. |
| 6 | Gobutton and light. |
How do I reset my HP Laserjet p2015 printer?
Press and hold the GO button on the control panel of the printer. Turn on the printer and continue to hold the GO button for at least 50 seconds. During this process the Attention, Ready and Go lights turns on together. Then the Attention and Ready lights turns off, leaving just the GO light illuminated.
How do I fix the paper jam on my HP Laserjet p2015?
Unplug the power cord when the printer is on and leave it unplugged for 10 Seconds. Turn the printer back on. If the light is still on then there may be a paper jam sensor that has stuck paper in it.
How do I change the IP address on my HP P2015?
HP LaserJet P2015 – configure fixed IP provided by Network Services
- Select Network Settings tab.
- Select Manual IP configuration.
- Enter fixed IP provided by Network Services.
- Save, then restart printer.
Why does my HP printer says paper jam when there isn’t one?
Dust, paper fiber, and other debris might accumulate on the paper feed rollers and cause paper jams and paper feed issues. Clean the rollers inside the printer, and then try to print again. Turn off the printer, and then disconnect the power cord.
What does a yellow triangle with an exclamation mark mean on a printer?
Seeing a yellow triangle with an exclamation mark usually indicates that a hardware device needs to be updated. If you are seeing the mark in Device Manager, we recommend checking the device status of the printer driver.
Why is my HP printer blinking yellow?
The light bar glows amber if there is a printing error. Look at the other lights on the printer to find and resolve the error you are experiencing.
How do I change the IP address on my HP LaserJet printer?
Open the Embedded Web Server (EWS) by opening an Internet browser page, type the IP of the printer on the address bar and press Enter. The web page of the printer will pop-up. Click Networking tab, change the required IP address, subnet mask, and gateway.
What do the lights mean on my HP LaserJet p2015 series printer?
HP LaserJet P2015 Series Printer – Control panel overview. The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status. 1. Jam light: Indicates that there is a jam in the printer. 2.
How to Fix HP LaserJet p2015 Paper Jam light solid on issue?
The HP LaserJet P2015 may come up with Paper Jam Light solid ON and would show the same light pattern even if the printer is power cycled. Reset the printer using the Super NVRAM initialization.
How to fix laser/scanner error on HP printer?
Remedy: 1. Unplug the printer for at least ten minutes, and then plug it in again. 2. Verify that the fuser connector and thermistor connector are both firmly seated in the ECU 3. Perform a heating element resistance check. 4. If the resistance readings are correct, but the error persists, replace the fuser. Description: Laser/scanner error.
What does the toner light mean on my HP printer?
Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer, the Toner light blinks. Paper out light: Indicates that the printer is out of paper.
