What do you cut Celotex with?

What do you cut Celotex with?

I use a plasterboard saw. Quick and accurate enough if you are careful.

Is cutting Celotex harmful?

Cutting and drilling insulation boards will release dust. Inhalation of dust may cause respiratory irritation and other health conditions. Any such activity should be carried out in a well-ventilated area, wearing a dust mask and safety glasses.

Should you wear a mask when cutting Celotex?

When cutting Celotex product on site, use the Celotex Insulation Saw to minimise dust. When sawing in an enclosed space, dust extraction, eye protection and face masks must be provided.

Can you cut Celotex with a hot knife?

The only tools i used when cutting Celotex foam board . Was a 12’in haksaw blade and a Stanley knife . Then used used Polyfilla mixed with water and PVA to cover the foam in places. Then cover with Grass and bushes .

Is Celotex loft insulation safe?

According to BBC news “The Celotex RS5000 insulation, which was used in the refurbishment of the famous burnt Grenfell building, released toxic fumes which contain cyanide when it burns. There are fire-proof insulation that will be safer during fire and will not spread poison inside.

What’s the best way to cut fiberglass insulation?

To cut thick batts or rolls of fiberglass insulation easily, use an extendable utility knife that has snap-off blades. Extend the blade all the way out to provide a long, sharp edge that perfect for cutting through thick insulation. Use a board to compact the insulation and provide a straight edge for cutting.

Is Kingspan insulation dust harmful?

Inhalation: Dust is non-hazardous. As with all cutting procedures it is recommended that a disposable dust mask be worn.

Can you cut insulation with a table saw?

If you need the rigid foam insulation to match exact specifications, a table saw is an effective cutting tool.

Which way up does Celotex go?

It faces in, it faces out, it faces towards the roof, it faces towards the space, it faces towards the room. And wait for it, it should have foil on both sides, so all is correct, because it can face the room, the ceiling, the roof and the space all at the same time.