What does 106 mean on a capacitor?
What does 106 mean on a capacitor?
So, for example, if the digits are ‘106’, this equals a capacitance value of 10μF. The first 2 digits are ’10’ and the multiplier factor is 1,000,000, so the value is 10,000,000pF or 10μF (10pF x 1,000,000= 10,000,000pF= 10μF).
What is value of capacitor?
The nominal value of the Capacitance, C of a capacitor is the most important of all capacitor characteristics. This value measured in pico-Farads (pF), nano-Farads (nF) or micro-Farads (μF) and is marked onto the body of the capacitor as numbers, letters or coloured bands.
How do you convert Farad to MicroFarad?
To convert a farad measurement to a microfarad measurement, multiply the capacitance by the conversion ratio. The capacitance in microfarads is equal to the farads multiplied by 1,000,000.
What is the value of 100000pf on a capacitor?
The first two figures give 10 the third figure’4′ gives 0000 and the last ‘k’ = 10%. Therefore, the capacitor is 10,0000pF, 10%. This is normally expressed as 0.0luF or l00nF – capacitors with a value below 0.001uF are expressed in Picofarads.
What do the letters in the Oluf code on a capacitor mean?
Quite often there is a single letter, indicating tolerance. The code is worked out in picofarads, so there is a chance you may have to use the appropriate multiplier. For example a capacitor may have a code ‘104k’. This decodes as OluF 10%. The first two figures give 10 the third figure’4′ gives 0000 and the last ‘k’ = 10%.
What are the different types of capacitor values?
Capacitors are a very common form of electronic component and capacitor values are generally expressed in terms of microfarads, µF (sometimes uF when a micro character is not available), nanofarads, nF and picofarads, pF. Often there is an overlap between these multipliers.
What are the requirements for capacitance conversion?
A further requirement for capacitance conversion is that for some capacitor marking schemes, the actual capacitance value is given in picofarads, then requiring the value to be converted to the more usual nanofarads or microfarads is required. Also other forms of electronic component use the same forms of multiplier.
