What does 142×12 mean?
What does 142×12 mean?
12 mm is the axle diameter, 142 mm refers to overall shoulder to shoulder width of hub (end cap to end cap) Cassette and disc rotor are in the exact same relation to the hub’s centerline as a standard 135 mm QR hub.
What does HH12 mean?
The Hurricane Heat 12 Hour or HH12 sets a standard and helps determine who is eligible for the Spartan Agoge.
What is Quick Release spacing?
Typical quick-release axles are 11 or 12 mm longer than the spacing of the hub locknuts. This gives 5.5-6 mm of axle protrusion on each side. You don’t actually need nearly this much, so for respacing hubs to wider spacing, if you’re not adding more than, say, 5-6 mm of spacers, you don’t need a new axle.
Are thru axles interchangeable?
Because thru axles are a relatively new development invention, there is currently no industry standard. Countless different manufacturers produce their thru-axles to different specifications, making it impossible for Tailfin to make a single thru axle that will suit every bike.
Is thru axle better?
1. Thru axles are safer- This is probably the biggest benefit for the average cyclist. Thru axles improve safety by making it nearly impossible for the front wheel to come out of the dropouts while you’re moving. The dropouts can’t lift off of the axles vertically because they have holes instead of a u-shaped slots.
Are quick release bike wheels safe?
No. They must be done up properly, though. This is especially important if you have disc brakes and quick releases where the braking forces try to eject the wheel out, which would produce a rather dangerous crash.
What is boost MTB fork?
What is Boost? Boost is the latest and greatest axle platform which all performance mountain bike frame and fork manufacturers are adopting. Boost widens the rear axle by 6mm and the front axle by 10mm. So what does Boost do for you? A wider axle means that the spacing between your hub’s flanges can be increased.
Which is better quick-release or thru axle?
Can you convert quick-release to through axle?
You can use through bolts (which can be quick release) in QR dropouts. These require specific hubs that allow for a 9mm front through bolt and a 10mm rear through bolt. On most Shimano hubs (and some similar Formula type hubs) you can replace QR axles with solid axles and use axle nuts on each end.
Can I use quick release to thru axle?
The best and easiest solution is to swap out your quick release fork for a thru axle fork. In most cases, you will also need a new front hub that is compatible with thru axles. 15 mm is the most common diameter for front thru axles. There are also adapters that allow you to use a thru axle hub in a quick release fork.
What is a 12 x 142 thru axle?
The goal of a 12 x 142 mm axle standard is to make thru-axles as quick and easy to use as a quick release system. Stiffness of a 12 mm thru-axle, but with a quick release’s wheel self centering feature.
What does 12 x 142 mean on a tire?
12 x 142 mm Axle Details The goal of a 12 x 142 mm axle standard is to make thru-axles as quick and easy to use as a quick release system Stiffness of a 12 mm thru-axle, but with a quick release’s wheel self centering feature 12 mm is the axle diameter, 142 mm refers to overall shoulder to shoulder width of hub (end cap to end cap)
What is the difference between 150mm and 12x142mm rear hub spacing?
Whereas 150 mm rear hub spacing requires the use of an 83 mm bottom bracket shell for proper chainline, 12 x 142 mm produces the same chainline as a standard QR rear wheel and works perfectly with any variation of B.B. that you’ll find on modern XC or AM bikes
Will a 12x135mm thru axle hub fit in a frame dropout?
Frame dropout’s have 3.5 mm of inset per side that hub endcaps fit into – just as with a 10 x 135 mm QR wheel There is not enough room on the driveside of a 12 x 135 mm thru-axle hub to build in the same hub locating ability, the extra 7 mm of overall width was required for the system to work
