Popular guidelines

What does a Zing Ear do?

author 0

What does a Zing Ear do?

Installing a Zing Ear pull chain switch provides control over the device. The company’s line of pull chain switches can be used as a replacement part inside a lamp or fan, or to control any electrical device.

How do I connect my zing ear switch?

Steps

  1. Write down the color of each wire and the portal number to which they are attached.
  2. Take wires off the existing switch.
  3. Make sure that the wire lead length is the same length as the line beside word “STRIP”
  4. Connect wires to the new switch as noted in step 1.

What does the L on a fan switch mean?

Load
The L stands for Load which is the Black wire. 1,2,3 are the fan speed control wires. You can test the speeds one at a time by (Power off) hook up one of the other wires then power on and try it.

How do you wire a zing ear?

Steps:

  1. Write down the color of each wire and the portal number to which they are attached on the switch.
  2. Remove wires from existing fan switch.
  3. Make sure that the wire lead length is the same length as the line beside word “STRIP”
  4. Insert wires into the new switch as in the previous switch (see step 1).

Why is my ceiling fan light not working?

Check the pull chain on the fan assembly that operates the lights. If the fan blades and the ceiling fan lights don’t work, the problem might be that power isn’t getting to the room. Check a nearby outlet to see if it has power. Reset the breaker and then test the ceiling fan light and blades.

How do you fix a ceiling fan that won’t spin?

If the Ceiling Fan Speed Control isn’t Working Properly

  1. Step 1: Locate the ball bearings and give them a good cleaning.
  2. Step 2: Replace the ceiling fan capacitor.
  3. Step 3: Check to make sure your ceiling fan’s motor isn’t getting too hot.
  4. Step 4: Replace the ceiling fan motor if it feels hot during this test.

author

Back to Top