What does Fe mean on Whirlpool washer?
What does Fe mean on Whirlpool washer?
Whirlpool FE – WATER OVER FLOW ERROR // Water continuing to enter machine.
What does Error Code F mean on Whirlpool washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen. When the door fails to lock, the machine won’t run at all.
How do you read a Whirlpool dishwasher code?
You need to count the number of times the clean light flashes to find out the error code on your Whirlpool dishwasher. As an example: If the clean light flashes 5 times followed by 2 flashes (5-2) then this error is showing the function code = “Door issue” and the problem code is “The door switch is in question”.
What does F mean on the washing machine?
The F indicates that the washer control detected a component problem. If the F code was caused by excessive suds preventing the washer from draining, you may be able to shut the door and run a drain/spin cycle to remove the water from the washer.
How do you fix the F 28 code on a Whirlpool Duet washer?
An F28 error code is a common problem that means there is a communication problem with the central control unit. This problem is generally solved by essentially rebooting the control unit. Rebooting the control unit is accomplished in less than 10 minutes, even by the novice.
What does F15 mean on a Whirlpool washing machine?
The Whirlpool Duet Washer F15 Error is a Motor Control Unit Error. If the central control unit (CCU) detects multiple failures or resets of the motor control unit (MCU) the control will shut down the cycle and report the F15 error. This error is almost always caused by a failed motor control unit.
What does F 51 mean on a washer?
The F51 error may indicate there is a MOTOR ROTOR POSITION SENSOR FAILURE (RPS). The sensor and control board has a connection or fault issue. This error can be cleared by cleaning/reconnecting the sensor OR replacing it.
How do I fix F02?
Press the pause or cancel button on the Whirlpool washing machine to clear the F02 error code from the display, and try using it again. The error code is displayed when the washer takes more than eight minutes to drain, but may just be a glitch.
