What does parked regen mean on a international truck?
What does parked regen mean on a international truck?
Activating Parked Regen Parked regeneration is a form of active regeneration in which the driver must park the vehicle and initiate the regeneration process by pushing a button on the dash. This process does not pertain to light-duty pickups and vans with 2007-compliant diesel engines.
How do you force a parked regeneration?
Make sure your engine jake brake switch is off, cruise control turned off, ensure your parking brake set, and truck is in neutral. Hold down the regen button and keep holding the button down for at least 10 seconds. The engine RPM’s will start to increase from IDLE to a higher RPM. Remember, do not cancel the regen.
What does inhibit regen mean on an international truck?
Regen Inhibit (switch on right) allows you to cancel or stop an. Exhaust Regeneration. (
How do I turn off ECON mode on my international truck?
Luckily, switching between driving modes and knowing how to turn off Econ on an International Truck is easy. Drivers can turn this function on or off with a button on the shifter. Simply push the button with your thumb, and you should see the Econ light turn off.
How does the ECM know when to Park Regen?
The ECM runs numerous checks on the condition of switches it requires to initiate a parked Regen. Cruise control, Engine Brakes, Park brake, clutch pedal, throttle pedal, brake pedal, transmission neutral switch and DPF soot load need to be working and reading the condition the ECM requires to initiate the process.
What are the conditions for parked Re-Gen to work?
Before initiating Parked Re-Gen, make sure the following 4 conditions are met: DO NOT: touch the brake or clutch pedals during the process DO: make sure the engine coolant temperature doesn’t exceed 170 F, 76.6 C. Once those 4 conditions have been met, push and hold the Engine Re-Gen button for 2 seconds.
Can I parked Re-Gen on grass or soil?
Do not perform a parked regeneration on grass or soil as the exhaust becomes very hot and can cause a fire. Before initiating Parked Re-Gen, make sure the following 4 conditions are met:
What does it mean when the “Regen” button flashes?
In this instance, the driver did everything correctly but the truck wasnt responding. Usually when the “Regen” button flashes, its an indicator to the driver that a condition isn’t met.
