What fluid does a Dana 44 take?
What fluid does a Dana 44 take?
Axle Differential (Rear)226 RBI (Model 44)– We recommend you use Mopar Gear& Axle Lubricant (SAE 80W-90) (API GL-5) or equivalent. For trailer towing, use Mopar Synthetic Gear & AxleLubricant (SAE 75W-140).
How much oil do I put in my differential?
Fill to the Brim Use the highest-quality gear oil you can afford to fill the differential. The weight and capacity will be listed in your owner’s manual; your differential will usually hold as much as 3 quarts.
What size axle is a Dana 44?
The Dana 44 came with axle tubes anywhere from 2.5 to 3-inch in diameter. The Dana 60 only came with one axle diameter of 3.125 inches, which is pretty big.
Can you run 40 inch tires on a Dana 44?
For a daily driver or a non wheeling rig, 44 and 40’s are fine.
What size is a Dana 44 axle?
The Dana 44 came with axle tubes anywhere from 2.5 to 3-inch in diameter. The Dana 60 only came with one axle diameter of 3.125 inches, which is pretty big. Those larger axle tubes help strengthen the housing, but also make room for larger axle shafts.
What is a Dana 44 housing made of?
The ZJ Dana 44 is the only Jeep Dana 44 with an aluminum differential housing. It is also a C-clip axle with one piece shafts and a 5 on 4.5″ wheel bolt pattern. Because of the aluminum housing and C-clips, it is not really any more desirable than a Dana 35c.
Is Dana 30 and Dana 44 spindle the same?
The Dana 30 has a concentric shape, and the Dana 44 had an offset shape. Note: All of the parts in this illustration will not apply to all years. Identify your front end and then check the part description for proper application. There are 3 different spindles that were used from 66-77.
Are Dana 30 and Dana 44 Knuckles the same?
Well, they’re all the same . The Dana 30 and the Dana 44 have the same brakes, hubs, ball joints, Cs, knuckles, and steering. So other than the beefier center section, and the beefier axle shafts, these two are completely identical otherwise.
