What happens if two access points have the same SSID?

What happens if two access points have the same SSID?

It is permissible to have multiple AP with the same SSID. This is standard practice in a multi-AP environment. You just need to make sure they are on different channels. You can leave them broadcasting if they are both the exact same SSID, or you can disable the broadcast on the second and follow what Mike said.

Can two WiFi networks have the same SSID?

You can run two routers with the same SSID to increase the range of your Wi-Fi network, but you must set up one router to handle the network administration and the other to act as a bridge back to the primary router.

Should two access points be on the same channel?

When APs have overlapping coverage they should be set to different non-overlapping channels. This prevents the APs from causing an increase in channel utilization or interfering with each other. The goal of using different non-overlapping channels is to avoid the affects caused by channel utilization and interference.

Should access point have the same SSID?

It’s usually a very good idea to give all the access points on your network the same SSID. It reduces clutter when initially viewing the list of networks- they will all appear to be just one single network.

Can you have too many wireless access points?

When you have APs in overlapping channels, it causes interference. If channels overlap and there are too many APs this will definitely cause poor performance. The purpose of a WiFi site survey is to determine the best and most optimal AP placement for the best coverage without channel overlap.

Should I use the same SSID for 2.4 and 5Ghz?

Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

What happens if I configure my two WiFi networks with the same SSID the same encryption and the same password is this recommended?

Your devices will connect exclusively to one or the other. However using the same SSID, encryption and password will make no difference one way or the other, though it might be easier to manage.

Can two WiFi routers interfere with each other?

If both the existing and second routers are wireless, their Wi-Fi signals can interfere with each other, causing dropped connections and unpredictable network slowdowns. To avoid signal interference between two routers in a home, set the first router to channel 1 or 6 and the second to channel 11.

Should my dual band router have the same SSID?

Pros of naming the SSIDs the same: Almost all current wireless devices support both 2.4Ghz and 5Ghz frequencies. Older 2.4Ghz only devices will just connect to the 2.4Ghz frequency and not even see the 5Ghz frequency, so having the same SSID will work fine for them.

Why wirewireless – same SSID from multiple WAP’s?

Wireless – Same SSID from multiple WAP’s? To provide better coverage in an area with structural interference, I plan to set up multiple Wireless Access Points (not routers, as I want everyone on the same subnet) in a pattern that will overlap coverages to assure that users have access no matter where they may be in the facility.

Can I setup two WAPS with the same password?

You can setup each WAP with the same SSID and password, however make sure they are on different channels. I would also recommend putting as far apart as possible. For example, WAP1 is on channel 2 and WAP2 should be channel 8 etc.

How many SSID’s does each AP broadcast?

Each AP broadcasts 2 SSID – a user SSID and a GUEST SSID, plus a 3rd ‘hidden’ SSID for IoT – each with a separate VLAN. I’m using the wrong terminology. I meant to say APs, not routers. All are different vendors, wired through multiple switches.

Do all WiFi routers have the same SSID & Password?

All have the same SSID & password, but different channels & IP addresses. Works wonderfully well and expands good WiFi coverage out about 150 feet into the front yard. Make certain that you use different channels on each router, and that needs to be done for 2.4 & 5Ghz bands.