What is a 2B finish on stainless steel?
What is a 2B finish on stainless steel?
2B: This is achieved by cold rolling, heat treating and pickling, along with the application of a light rolling at the end in order to achieve a smooth and reflective sheen. Considered the most widely used surface finish, 2B is the basis for most polished and brushed finishes.
What Grit is a 2B finish?
120-150 grit
2B material, the finisher would use 120-150 grit belt or drum on the linear finisher to set the scratch and then finish with a fine or 180-220 fleece nonwoven drum or a fine belt.
What is a 2D finish on stainless steel?
2D is a dull, silver gray and non-reflective finish which results from cold rolling followed by annealing and descaling, and may perhaps get a final light roll pass through unpolished rolls. It’s widely used in the industry that may not concern the uniform of the finish.
What is ss304 2B?
Premium Grade 304 Stainless Steel Premium stainless steel grade 304-2b is a very low carbon, austenitic chromium-nickel steel with good corrosion resistance, superior resistance to intergranular corrosion following welding or stress relieving, and high malleability.
How strong is 304 stainless?
Stainless Steel 304
| Properties | ||
|---|---|---|
| Properties | Value | Comment |
| Hardness, Rockwell B | 82 | |
| Tensile Strength, Ultimate | 621 Mpa (=90100psi) | |
| Tensile Strength, Yield | 290 Mpa (=42100psi) | 0.2% YS |
Does 304 stainless polish well?
The passivity properties of stainless steel also require fast polishing speeds. 304 is a basic type of stainless steel and one of the simplest to polish. 430, on the other hand, develops a hard oxidized surface layer and is more difficult to polish.
What does BA mean ON 304 stainless steel?
+ Read Description. The 304 stainless steel bright annealed (BA) finish is cold rolled stainless steel that is annealed in a controlled atmosphere to retain a highly reflective finish.
What is the 304 stainless steel bright annealed finish?
The 304 stainless steel bright annealed finish has a PVC film on one side to help protect against scratching during fabrication and installation. We offer value added fabrication to our 304 stainless steel bright annealed sheets, including hemming, laser cutting and corner rounding.
What is 2B finish stainless steel used for?
Stainless steel with a 2B finish is generally used for bakeware and flatware, plumbing fixtures, solar panels, industrial equipment, and wheel covers.
What is the difference between 2B and 4 grit stainless steel?
The higher the grit, the finer the lines and the more reflective the surface will be. No. 4 finished stainless steel is duller than stainless steel with a 2B finish.
