What is a 6 point socket called?

What is a 6 point socket called?

hexagonal
A “hex” socket—short for “hexagonal”—is a socket that fits around a hexagonal (six sided) nut or bolt head. There are two types of hex sockets – six point and twelve point. The six-point hex socket has six points (angles) inside the bolt end, making a perfectly even hexagon.

Are 6 point sockets good?

Answer: It’s true that 12-point sockets are fine for most lightweight repairs, but heavy wrenching calls for a six-point socket. A six-point socket is much less likely to slip off a stubborn fastener or round over the corners. Here’s why: (1) Six-point sockets have thicker walls, so they’re less likely to flew.

When should a 6 point socket be used?

Ideal for jobs that require a large amount of force. Additional contact surface along the flat edges of the socket make it less likely to slip. Slipping strips bolts and that’s definitely something you don’t want to do.

Why do they make 6 point and 12 point sockets?

They have numerous benefits over the 12 point sockets. Therefore, 6 point sockets are the clear winner, and here’s why: Six-point sockets have thicker walls than 12 point sockets. Thus, 12 point sockets often come out of the fastener due to its thinner material.

Is Tekton a good tool brand?

Both Tekton and Gearwrench are great brands in terms of quality and serviceability. This brand manufactures wrenches, ratchets, and sockets. All these tools are meant to make your work easier and accurate. Both brands are reliable, but there has to be a better one.

Can you use a 12 point socket on a 6 point bolt?

12 point sockets are actually meant for use on 12 point bolts or cap screws that have twelve points, 6 point sockets are meant for use on 6 point bolts. There are also square bolts that either an eight point socket or a four point socket can be used on.

Will a 12 point socket work on a 6 point nut?

Both 6-point and 12-point sockets can be fitted on hex nuts, the primary differences being convenience and torque. In other words, you would need to rotate only up to 30 degrees to fit a 12-point socket onto a hex nut. This can prove to be a time-saver and make life easier when you’re working within confined spaces.

Can a 12 point socket be used on a 6 point head?

Is Tekton Made in USA?

TEKTON tools are made in China, Taiwan, or the United States, depending on the item. This particular hex key wrench set is made in China. Feel free to email us at [email protected] or call us at 888.648. 3371, if you have any other questions or concerns.

What company owns Tekton tools?

Michigan Industrial Tools
Tekton started off by selling some of the better tools that their parent company, Michigan Industrial Tools, had been importing for resale. The brand has been going through a sort of transformation process these past few years, and has really been trying to improve many of their tools.

What socket has a universal joint?

Universal Joints, or Universal Joint Sockets, are used with a ratchet or other socket driver to drive sockets at an angle. This is often very useful in applications with confined or awkward spaces.

What advantage does a 12 point opening have over a 6 point opening?

On a non-ratcheting wrench, 12-point box ends benefit from having more positions for engaging the fastener. This can be helpful, especially in situations with limited access. However, the tool is more likely to slip or fail when used on a 6-point fastener, especially if you apply a lot of force.