What is a battery fill system?

What is a battery fill system?

When you fill your battery with a Pro-Fill watering system, you know that it’s filled to the correct level every time. A properly watered battery lasts longer and performs better. Fill batteries without ever having to remove the vent covers again.

What is a battery self watering system?

This safe solution consists of automatic shut-off valves, interconnected with tubing, which replace battery vent caps. The tubing is attached to a quick coupler that is connected to a water supply. Single point watering systems allow you to fill your batteries efficiently without exposing you to dangerous battery acid.

What do you fill a 6 volt battery with?

Battery manufacturers also recommend using only distilled or deionized water and to use a watering gun or pitcher to fill each battery cell. Ensuring your batteries are properly watered will add life and provide optimum performance from your deep-cycle batteries.

What is a single point watering system?

The Single-Point Watering Kit includes automatic shut-off valves, interconnected with tubing, that replace the existing vent caps. A quick coupling allows the system to be connected to a water supply. Once the watering system is installed, water flows into each battery cell until it reaches the correct level.

How full do you fill a battery?

The fluid should be about 1/2- to 3/4-in. above the internal “plates,” or about 1/2- to one-inch from the top of the battery (just to the bottom edge of the fill hole). If the fluid is below that, it needs to be topped off.

What is battery electrolyte?

The electrolyte in a battery is the substance that allows electrical current to flow between the anode and the cathode. Electrolytes may be fluids or solids. Electrons entering and leaving the battery terminals cause chemical reactions at the electrodes, which create clouds of these ions to form around them.

Do you need to charge a battery after filling with acid?

A battery must be charged to 100% before putting it into service. After adding acid, charge for another hour at the same rate as above to mix the water and acid together. Note: This is the last time electrolyte should be added to the battery. If the level is low during use, distilled water should be added as required.

What is the pro-fill onboard battery watering system?

The Pro-Fill Onboard Battery Watering System is specifically designed for use with “golf car” style batteries commonly found in golf cars, sweepers, scrubbers, RVs, pallet jacks, and small solar systems.

What is Battery watering technologies single-point system?

With Battery Watering Technologies single-point system, there’s no more opening vent caps manually and filling each cell individually. Water flows through a single connection, filling each cell accurately and efficiently. The whole process takes less than one minute.

What happens if I overfill my battery with water?

When you fill your battery with a Pro-Fill watering system, you know that it’s filled to the correct level every time. A properly watered battery last longer and performs better. Overfilling a battery results in loss of acid, while charging with low electrolytes will result in permanent damage to the lead plates.

What is pro-fill and how does it work?

Simply put, Pro-Fill is the safest way to water your batteries. When you fill your battery with a Pro-Fill watering system, you know that it’s filled to the correct level every time.