What is a drill pipe connection?
What is a drill pipe connection?
The drill pipe joint is a component of the drill pipe, divided into a male joint and a female joint, which are connected to the two ends of the drill pipe body. In order to enhance the connection strength of the joint, the wall thickness of the pipe body needs to be increased at the joint.
What is internal flush drill pipe?
A type of tubing connection in which the internal or external surfaces are the same diameter throughout the tubing joint. Internal flush joints are most common, offering no restriction to fluid flow.
What does if thread stand for?
Internal Flush
IF (Internal Flush)
How do I identify a drill pipe thread?
Most threads can be identified using three primary measurements and by viewing the thread form or shape of the thread.
- Pin Length: measured from the base of the thread to the tip.
- Shoulder Diameter: diameter of the base of the pin (male) or box (female).
What is drill pipe made of?
Drill pipe, is hollow, thin-walled, steel or aluminium alloy piping that is used on drilling rigs. It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annulus. It comes in a variety of sizes, strengths, and wall thicknesses, but is typically 27 to 32 feet in length (Range 2).
What is Rotary shouldered connection?
A connection used on drill string elements which has coarse, tapered threads and sealing shoulders.
What is the difference between NPT and UNC?
UNC is Unified Coarse thread , the successor to the obsolete National Coarse (NC) thread. NPT National pipe thread is used (in the U.S.) for plumbing of water and gas pipes, and threaded electrical conduit. NPT is defined by ANSI/ASME standard B1. 20.1, American National Standard Taper Pipe Thread.
What is make up torque?
The rotational force used to make up a connection in the string. Drill pipe failure may occur when the make-up torque of a connection is exceeded.
How do I set up my V380?
Open Apple App Store, search, download, and install V380. 2. Connect the power plug to the camera and place the camera “right next” to your WiFi router. Camera sound: “System is starting”. Camera sound: “System startup completed”. 3.
How do I install V380 IP camera on my Device?
If you are experiencing problems with V380 IP Camera installation, WiFi connection, etc., please refer to this tutorial. 1. Open Apple App Store, search, download, and install V380 2. Connect the power plug to the camera and place the camera “right next” to your WiFi router. 3.
How to install APAP (access point) on V380?
AP (Access Point) installation (withor without WiFi Network) 1. Open Apple App Store, search, download, and install V380. 2. Connect the power cableto the camera. Camera sound: “System is starting”. Camera sound: “System startup completed”. 3.
How to install Wi-Fi Smart link with V380?
WiFi smart link installation (with WiFi Network) 1. Open Google Play Store, search, download, and install V380. 2. Connect the power plug to the cameraand place the camera “right next” to your WiFi router. Camera sound: “System is starting”. Camera sound: “System startup completed”. 3.
