What is a Gator cap?
What is a Gator cap?
Alligator’s inflate-thru valve caps are a time, money and labor saving solution that can reduce your tire pressure check time by up to 65%. The caps seal like a high pressure cap, yet offer the convenience of an inflate-thru extension. …
Are all valve stem covers the same size?
However, it may cause internal damage to the tire if the exposed Schrader valve gets damaged. Luckily, it is not an expensive part to replace, as most stem caps are one-size-fits-all, and you can pick a pack up online for a couple bucks.
Are valve stem covers necessary?
A valve stem cap is important for the Schrader valve because if one is not fitted, dirt and moisture can enter the inside of the valve stem, potentially jamming or contaminating the sealing surfaces and causing a leak.
How do you make an alligator tire?
Cut open the largest tire and flatten it out. The larger the tire, the longer the alligator. Cut one side open and cut in the teeth. Use the smaller tires for the arms and legs and attach them to the body using a heavy epoxy.
What size is a valve stem cap?
Valve Stem Sizes Depending on the application, valve stems holes in wheels will be typically 0.453” for cars / light duty trucks and 0.625” for heavy duty / commercial truck applications. Based on application, valve stems are available to fit 0.453” or 0.625” holes.
Do metal valve caps interfere with TPMS?
Nothing to do with TPMS. The TPMS module just happens to be also attached to the valve stem to avoid the need for rims with a separate mounting point for the TPMS sensor. Metal caps can get corrosion between the cap and stem, that’s the only issue.
Will a tire lose air without the cap?
While a missing valve stem cap may seem harmless, it can lead to loss of air pressure. Without a cap, dirt and debris will enter the valve stem where it can break through the seal. When this occurs, air will leak out of the tire through the valve stem.
How much does it cost to replace a tire valve stem?
Replacing your valve stem is an easy task to do, even if you aren’t a mechanic. New valve stems cost about $10 dollars to repair if you do it yourself. If you bring it to the shop, it will cost about $30.
