What is a thread take-up lever?
What is a thread take-up lever?
Answer: Every sewing machine has a thread take-up lever. It is the arm carrying the thread at the top of the machine that moves up and down in a narrow, shaftlike opening. It’s very important that this arm always be left in its highest position when you have finished sewing a seam.
Where is the thread take up lever?
The take-up lever is the metal lever (looks like a hook) that is on top of your machine and moves up and down while you sew. This lever is what pulls the thread off the spool and helps supply an even feed of thread to your needle.
Where do you place the spool of thread?
Place your spool of thread on the top of the sewing machine, on the spool pin. The spool should be turned so that the thread will be released counter-clockwise. Check the top of your machine for a diagram before you place your thread spool.
Where is the presser foot lever on a sewing machine?
The take-up lever is located directly above the presser foot of a sewing machine. It’s the part of the machine that pulls the thread from the spool to feed it through the machine and lifts the thread back up out of the cloth after a stitch has been made. Simply put, it’s the part that goes “up and down” as you sew.
Where is the throat plate on a Singer sewing machine?
A sewing machine throat plate is the metal plate beneath a sewing machine’s needle and presser foot. It is typically held in place with one or more screws. A sewing machine throat plate has holes or slots for the needle to pass through as it moves up and down to stitch the fabric.
How do I level my throat plate?
Starting at one corner, adjust the screw so it lifts the straight edge slightly and then back it off till it just touches the table. Repeat for the other corners and then go around one more time. The insert should be level with the straight edge along it’s entire length.
