What is accelerometer ADXL335?

What is accelerometer ADXL335?

The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum full-scale range of ±3 g. The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins.

What does a 3-axis accelerometer do?

A 3-axis accelerometer measures the accelerations that take place in relation to the 3 Cartesian coordinate axes. In other words, it can gauge the changes in the speed of a point. In addition, it can also detect the direction and speed of a moving object, by taking into account the dynamic acceleration.

How do I calibrate my ADXL335?

Calibration of ADXL335 – So for this, you need to upload the default code for accelerometers. Compile & upload the code. In serial monitor, you will see 3 values from 270 to 410. Hold the sensor stable in each of the directions – X, Y & Z axis & note down the values.

How do you test ADXL335?

Testing ADXL335 Response Using CIKU Stack together CIKU and LCD keypad shield together. Then using mini jumper connect the following: ADXL335 5V and GND pin to CIKU 5V and GND pin. ADXL335 x-pin to CIKU A0 pin.

How do I calibrate ADXL345?

  1. Install the Library: Download the ADXL345 library and install it.
  2. Test: Click “File->Examples->Adafruit_ADXL345->sensortest” to load the example sketch from the library.
  3. Calibrate: The ADXL chips are calibrated at the factory to a level of precision sufficient for most purposes.

Which of the following can you do with the ADXL335 accelerometer?

Hardware Overview of ADXL335 Accelerometer It can measure the static acceleration due to gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.

What is the best 3 axis accelerometer?

Breakout board for the 3 axis ADXL335 from Analog Devices. This is the latest in a long, proven line of analog sensors – the holy grail of accelerometers. The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption – only 320uA!

What is the power consumption of the adxl335?

The ADXL335 is a triple axis MEMS accelerometer with extremely low noise and power consumption – only 320uA! The sensor has a full sensing range of +/-3g. There is no on-board regulation, provided power should be between 1.8 and 3.6VDC.

What are the applications of accelerometers?

Accelerometers are widely used in cost sensitive, low power, motion and tilt sensing applications like Mobile devices, Gaming systems, Disk drive protection, Image stabilization and Sports & health devices.

How do you calibrate a low-G accelerometer?

To calibrate low-G accelerometers, just use Earth’s gravity (1G) for each axis while the accelerometer is at rest. Make sure that each axis is perpendicular to the flat surface that you are using to calibrate the sensor. This skill defines how difficult the soldering is on a particular product.


Back to Top