What is aspect ratio Chainmaille?
What is aspect ratio Chainmaille?
Aspect ratio is a simple gauge that allows you to compare different sized rings and helps you to choose rings for a particular chain maille pattern. The aspect ratio (AR) of a jump ring is found by dividing the inner diameter (ID) of the ring by the size of the wire used to make the ring.
What is aspect ratio in jump rings?
Aspect Ratio is the Ratio (value) between a jump rings wire thickness or gauge (GA) and its Inside Diameter (I.D). This allows the next artist to build a lighter version using thinner gauge jump rings or a bolder version using thicker gauge jump rings and still maintain the structure of the chain.
What is a Byzantine pattern?
Byzantine chain is a rope-like type of chainmail that will help you create beautiful designs. We are using four different colors in our Byzantine chain so you can see how the pattern evolves. Use both pairs of pliers to close two black jump rings and two yellow jump rings.
How do you calculate the aspect ratio of a ring?
But to calculate the aspect ratio you need to know the ‘inside’ diameter. Simple, just subtract two times the wire diameter from the outside diameter. Remember you always need to work in mm. so if the wire is listed in AWG or the size is given in inches you need to convert it to mm.
What size jump rings is best for Chainmaille?
If two jump rings have the same wire gauge, but the inside diameter of one is smaller, that jump ring has a smaller aspect ratio….Everything You Need to Know About Jump Rings.
| Aspect Ratios Necessary for Common Chainmaille Weaves | ||
|---|---|---|
| Weave | Minimum | Usual |
| Inverted Round | 3.5 | 4 |
| Full Persian | 5.5 | 5.5 – 6.5 |
| Half Persian 4-in-1 | 4.4 | 4.7 – 5.9 |
How is Chainmaille aspect ratio calculated?
Aspect Ratio is the measurement of a ring as follows: MM ID / Wire Gauge. That’s millimeter inner diameter divided by wire gauge. All Weave Got Maille Jump Rings are listed by their inner diameter. A 16g 5mm WGM ring has an Aspect ratio of 5mm/1.2g = 4.1AR.
What does AR mean in Chainmaille?
Aspect Ratio (AR) One of the terms dealing with chainmail that you will run across a lot is Aspect Ratio. It may seem intimidating, but it really isn’t that complicated. All it entails is dividing the Inner Diameter by the Wire Diameter. Like this: Aspect Ratio = Inner Diameter / Wire Diameter.
How do I know what size jump ring I need?
Selecting the Size of Jump Rings As the size of the jump ring gets bigger (diameter increases), the thickness of the wire should increase for it to hold more weight. For example, a 4 mm, diameter jump ring, made out of 20 gauge wire is a lightweight jump ring.
What is the best size wire gauge for a Byzantine chain?
These combinations have the best ratio of inside diameter to wire gauge for the Byzantine chain. This inside opening/gauge ratio is referred to as Aspect Ratio (AR). The best AR for the Byzantine chain is a range from 3.2 to 4.2.
What size jump ring do I need for Byzantine chainmail?
INSTRUCTIONS Byzantine chain is a rope-like type of chainmail that will help you create beautiful designs. For Byzantine chain, you can use jump rings in the following sizes: 14 gauge – 7.94mm (5/16 inch) or 16 gauge – 6.35mm (1/4 inch) or 18 gauge – 4.76mm (3/16 inch) or 20 gauge – 3.17mm (1/8 inch).
What are Weave and rectangular chainmaille?
View our ”Chainmaille Glossary” chart for more helpful definitions. Learn How! Weave is a square shape if AR is 4.8 and higher and a rectangular shape if AR is 4.7 and lower. Two ring sizes needed. The outer diameter of the smaller ring must be slightly smaller than the larger ring’s inside diameter.
What does AR stand for in chainmaille?
Note: AR is an abbreviation for the term Aspect Ratio (AR). View our ”Chainmaille Glossary” chart for more helpful definitions. Learn How! Weave is a square shape if AR is 4.8 and higher and a rectangular shape if AR is 4.7 and lower. Two ring sizes needed.
