What is ATCA chassis?
What is ATCA chassis?
ATCA chassis [or shelf] are designed to function in a normal ANSI/EIA 310 cabinets (IEC 60297-1, and 60297-1). The chassis are 12U high to support 8U high boards. Up to three 12U chassis will fit into a 42U rack. The standard chassis width is 19 inch [supporting up to 14 CCAs], or 23 inch [supporting up to 17 CCAs].
What does ATCA mean?
ATCA
| Acronym | Definition |
|---|---|
| ATCA | Advanced Telecom Computing Architecture |
| ATCA | Advanced Telecom Computing Architecture (also AdvancedTCA) |
| ATCA | Alaska Tobacco Control Alliance |
| ATCA | Air Traffic Controllers Association |
What does a shelf Manager do?
Shelf Management The Shelf Manager monitors and controls the boards (blades) and FRU in the shelf. If any sensor reports a problem the Shelf Manager can take action or report the problem to a System Manager.
What is a chassis in telecommunications?
The assembly highlighted here is a chassis that is used in the telecommunications industry. Because the chassis is used to secure multiple components within an enclosure, there are several part features, including numerous hardware components that must fit within this relatively small envelope.
What are the different types of chassis?
Types Of Car Chassis Explained | From Ladder To Monocoque!
- Ladder Frame Chassis. Ladder chassis. One of the oldest chassis, the ladder chassis gets its name from the shape of has which simply put, is like a ladder.
- Backbone Chassis. backbone chassis.
- Monocoque Chassis. Monocoque.
- Tubular chassis. Tubular Chassis.
What is f1 chassis?
Chassis. The main part of a racing car to which the engine and suspension are attached is called the chassis.
What chassis type would be most suitable for a heavy vehicle?
Ladder Frame Chassis Its quality of being easily manufactured not only made it contemporarily popular but also eased the way for its mass production. Since ladder frame chassis is significantly heavy it’s usually used for vehicles that transport heavy material.
Which is faster IndyCar or F1?
Formula 1 vs IndyCar – Which Is Faster – The Conclusion An F1 car will outpace an IndyCar on an F1 track time and time again. An F1 car has much more acceleration than an IndyCar and will easily gain a lead on the IndyCar at the start. Its greater downforce also enables it to take the turns at higher speeds.
Which frame is used in civil cars?
This construction design is known as body-on-frame. By the 1960s, unibody construction in passenger cars had become common, and the trend to unibody for passenger cars continued over the ensuing decades. Nearly all trucks, buses, and most pickups continue to use a separate frame as their chassis.
What are the parts of atca-s2 blade server?
The ATCA-S2 blade server consists of a chassis (14- or 2-slot type), switch blades, server blades, and packet processing blades. The features of these parts are introduced below.
What size cabinet will ATCA chassis fit in?
ATCA chassis [or shelf] are designed to function in a normal ANSI/EIA 310 cabinets (IEC 60297-1, and 60297-1). The chassis are 12U high to support 8U high boards. Up to three 12U chassis will fit into a 42U rack.
What is an ATCA card?
The ATCA specification defines the Rack and chassis [Shelf] form factors, [passive] backplane, cards, power, Keying. The electo-mechanical specification is based on IEC60297. ATCA, uses an 8U [322.25mm high x 280mm deep] card [Blade] size, spaced 1.2″ apart [6HP pitch]. An ATCA card can handle up to 4 PMC daughter cards.
What is the difference between ATCA and shelf backplane?
ATCA, uses an 8U [322.25mm high x 280mm deep] card [Blade] size, spaced 1.2″ apart [6HP pitch]. An ATCA card can handle up to 4 PMC daughter cards. A shelf backplane is only 6U high and interconnects the Zone 1 and Zone 2 connectors.
