What is brass C36000?
What is brass C36000?
C36000 Brass is commonly known as “Free Cutting” or “Free Machining” Brass. With a machinability rating of 100 this material is the standard by which all other metals are measured by. The 2 phase structure of C360 tends to form broken chips instead of continous coils, which interfere with high speed machining.
What does the 360 in 360 brass mean?
Copper Alloy No. C36000 (“Alloy 360” or “360 Brass”), is a standard alloy consisting of copper and zinc which contains about three percent lead. Smaller amounts of lead gives 360 Brass a very desirable level of machinability.
What is full hard brass?
It has the highest strength and lowest ductility compared to the other variants of C36000 brass. The graph bars on the material properties cards below compare H04 C36000 brass to: wrought brasses (top), all copper alloys (middle), and the entire database (bottom).
What is H02 brass?
H02 C36000 brass is C36000 brass in the H02 (half hard) temper. The graph bars on the material properties cards below compare H02 C36000 brass to: wrought brasses (top), all copper alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set.
What is half hard brass?
In the case of machinable brass rod, half hard brass is the standard terminology for nearly all common applications of free cutting brass rod.
What is the Rockwell hardness of brass?
| Physical Properties | Metric | English |
|---|---|---|
| Hardness, Rockwell 30T | 8.00 – 240 | 8.00 – 240 |
| Hardness, Rockwell H | 46.0 – 90.0 | 46.0 – 90.0 |
| Tensile Strength, Ultimate | 124 – 1030 MPa | 18000 – 150000 psi |
| Tensile Strength, Yield | 34.5 – 683 MPa | 5000 – 99100 psi |
What is the hardness of brass?
The hardness of brass has traditionally been discussed in terms relative to its maximum hardness. Publication No. 36 by the Copper Development Association (CDA) in the 1960’s show that for cartridge brass full hard is typically 175-185HV and fully annealed cartridge brass is typically 65HV.
What is ASTM B16 C36000?
ASTM B16 Applications C36000 free-cutting brass also has superior characteristics for soldering and brazing. This type of brass alloy is used for valve parts, faucet components, fasteners, plumbing fittings, and more.
What is 360 half hard brass?
360 brass, also known as free-machining brass, offers superior corrosion resistance and machinability when compared to 353 brass. Extruded round rod is compressed metal that is pushed through a die to create the shape.
What is C36000 brass?
C36000 Brass is commonly known as “Free Cutting” or “Free Machining” Brass. With a machinability rating of 100 this material is the standard by which all other metals are measured by.
What are the sizes of blueblue dot® C36000 brass rods?
Blue Dot® C36000 Brass Rod is available in round bar, hexagon bar, and square bar. Round bars range in diameters from 0.093” to 4.50” and cast & turned round bar is available from 5.00” to 10.00” as cast. Hexagon sizes range from 0.187” to 2.50” and square sizes range from 0.250” to 2.000”.
What does C36000 mean?
The high machinability rating of C36000 Free Machining Brass permits full utilization of screw machines speeds and feeds capabilities. C360 has superior machinability, thread rolling and knurling characteristics. In half hard condition, C360 brass can be a substitute for leaded steel in a majority of common screw machine products.
What is the machinability rating of C360?
With a machinability rating of 100 this material is the standard by which all other metals are measured by. The 2 phase structure of C360 tends to form broken chips instead of continous coils, which interfere with high speed machining. This brass alloy is suited for high speed machining.
