What is error code E07 Hoover washing machine?
What is error code E07 Hoover washing machine?
Error code E07 means there is a problem with either the washing machine door lock, or the motor. (In some models error code E01 will be displayed if there is a door lock fault.)
What does eo4 mean on Hoover washer?
Error code E04 means the washing machine has detected that there’s too much water in the drum.
What does E06 mean on a Hoover washing machine?
If your washing machine shows an E06 error code or the power light blinks six times before pausing the fault could lie with an unbalanced load! We have investigated the best practice to levelling out your wash load to help get your appliance working again.
What does E09 mean on a candy washing machine?
motor triac
An E09 error code means that you have a problem with the motor triac on the circuit board. This may mean that you don’t have any motor drive. An E10 error code on older machines may mean there’s a problem with the motorised selector. On new machines it could indicate a drum sensor issue if fitted.
What does E21 mean on a Hoover tumble dryer?
Error E21 usually means excess water left in condenser or condenser pump not working/pumping to the reservoir. This can be due to wet condenser and/or blocked/faulty pump. Unplug the appliance and remove the condenser, clean the area and let the condenser dry for a while.
What does E03 mean on a Hoover washer?
draining problem
An E03 error code means that your washing machine has encountered a draining problem. There are a couple of problems that could stop your Hoover washing machine from draining properly.
Where is the coin trap on a Hoover washing machine?
The filter flap is found at the bottom left hand side of the front of the cabinet. Clean away any debris tangled around the filter and look inside the body of the pump for any foreign objects such as keys and coins and remove them.
What does E21 mean on my Hoover tumble dryer?
What does E09 mean on a Hoover washing machine?
Hoover washing machine E09 error code indicates a short circuit in the motor triac that controls the spin speed on the electrical module and will need replacing. This fault code shows a problem with the timer, or an issue with the drum sensor, and is normally found on older Hoover washing machine models.
What does error code E09 mean on Whirlpool washing machine?
First things first check the display panel. If you can see either E09 or an LED continually flashing nine times between pauses your washing machine has detected a problem with a specific part. Error code E09 means there is something the matter with the part in the washing machine control board that drives the motor.
What does error code E16 mean on Hoover washer?
Hoover washer/ dryers will display this error code when the memory chip has been corrupted or the circuit board requires re-programming. E16 Hoover washing machine E16 error code points to a faulty water heater probably with a broken heating element which will cause your circuit breaker to trip every time you try to use your washing machine. E17
What does it mean when your Hoover washer says fault?
This fault code shows a problem with the timer, or an issue with the drum sensor, and is normally found on older Hoover washing machine models. If your washer/dryer is showing this code there’s likely to be a problem with the dryer sensor which may be worn due to excess tension.
