What is MAPL in telecom?
What is MAPL in telecom?
parameters on the maximum allowable path loss (MAPL) and. cell range is presented. The results show that the cell limit. increases when the network operates on 700 MHz range and on. 20 MHz BW.
What is cell radius in LTE?
Usually we can define three cell ranges: Large cells, small cells and micro cells. Large cells radius is from 1 km and normally it go beyond 3 km. Small cells radius is from 0.3 km to 1 km and Microcells radius generally in the range of 200 m to 300 m.
What is LTE TX power?
RS Tx. Power (Avg) is the average cell-specific reference signal power on the reference measurement channel for the data in the Measurement Interval. This data result can be used to calculate RSTP as defined in 3GPP TS 36.141 Section F. This data result is only applicable to downlink signals.
How is channel loss calculated?
Divide the first signal’s power by the second signal’s power to find the ratio of the two signals. For instance, if signal A has a power of 20 mW and signal B has a power of 5 mW: 20/5 = 4. Take the log of the the ratio of the signals by pressing the log button on the scientific calculator. For instance: log 4 = 0.602.
How is LTE capacity calculated?
To conclude, the LTE capacity depends on the following: Channel bandwidth. Network loading: number of subscribers in a cell which impacts the overhead….Downlink data rate:
- Pilot overhead (4 Tx antennas) = 14.29%
- Common channel overhead (adequate to serve 1 UE/subframe) = 10%
- CP overhead = 6.66%
- Guard band overhead = 10%
What is Max UE TX power?
UE MAX POWER As we know based on UE class category. It cannot transmit more than its maximum UE power which is commonly 23 dBm for most LTE UEs in the Uplink. The objective of the eNOdeB is that UE should transmit only enough power in the uplink in a range which is the minimum required amount.
