What is System 15 pipe used for?
What is System 15 pipe used for?
System 15 is designed for the majority of low-rise and light commercial applications where DWV systems don’t run through air plenums. CSA certified Schedule 40 pipe and fittings connect fast and easily using solvent cement.
Is system 15 fire rated?
When tested to the CAN/ULC-S102. 2 Standard, System 15 achieved a Flame Spread Rating of not greater than 25. Lightweight. Easy to handle.
What is XFR PVC?
System XFR is the world’s first engineered PVC DWV system rated for high buildings and air plenums where the National Building Code mandates more stringent Flame Spread and Smoke Development requirements which previously limited the use of thermoplastic.
What is XFR pipe used for?
System XFR is a PVC pipe that is rated for installation in high-rise and plenum applications where tighter flame and smoke regulations previously limited the use of thermoplastic.
What is the difference between PVC and DWV pipe?
The only real difference is that DWV PVC is not made to handle pressurized uses like schedule 40 parts are. Instead, DWV pipe and fittings are made to handle a different class of uses – Drain, Waste, and Vent (hence the name DWV). Another difference between DWV and standard PVC parts is the end types.
What does DWV pipe mean?
drain/waste/vent
Older homes built before 1960 used galvanized steel or cast-iron pipes for drain/waste/vent (DWV) systems. DWV systems remove wastewater and prevent the flow of sewer gases into homes.
What is the difference between XFR and System 15?
System 15 is a premium choice for DWV piping versus either ABS solid wall or cell core pipe. System XFR is listed to ULC S102. 2 to exhibit a Flame Spread Rating of not greater than 25 as well as a Smoke Developed Classification of not greater than 50.
What is CPVC vs PVC?
What are the differences between CPVC and PVC? The main difference between CPVC and PVC is the range of temperatures each is capable of withstanding. CPVC can handle temperatures up to 200° Fahrenheit, while PVC peaks at 140° Fahrenheit.
What is SDR pipe rating?
The SDR pipe is the “Standard Dimensional Ratio” and refers to the geometry of the pipe. SDR is defined as the ratio of the nominal outside diameter to the nominal wall thickness.
Is DWV and Schedule 40 the same size?
Another difference between DWV and standard PVC parts is the end types. DWV parts are made with the same threading (NPT) and are made to the same size as standard PVC fittings. Since this is the case, DWV and schedule 40 and 80 pipe and fittings will fit together, but it isn’t recommended that they be used together.
What type of pipe is used for DWV?
PVC
DWV systems remove wastewater and prevent the flow of sewer gases into homes. The most common types of pipe used in homes today are copper and polyvinyl chloride (PVC), which are strong, long lasting and easy to install. Other choices include chlorinated polyvinyl chloride (CPVC) and PEX pipe.
Why choose ipipex system 15?
IPEX System 15 – Plumbing & Mechanical – DWV Systems – PVC Designed for the majority of low-rise and light commercial applications where DWV systems don’t run through air plenums. As an investment, System 15 is a winner.
Is system 15 Pipe worth the investment?
As an investment, System 15 is a winner. It’s a cost-effective “workhorse” designed for the majority of low-rise and light commercial applications where DWV systems don’t run through air plenums. In addition to costing less than cast iron, System 15 pipe and fittings are engineered to withstand years of uninterrupted service.
Why choose system 15?
Do the math: System 15 is an unbeatable, cost-effective investment — now and for years to come. When tested to the CAN/ULC S102.2 Standard, System 15 achieved a Flame Spread Rating of not greater than 25. Lightweight. Easy to handle.
What is the flame spread rating of system 15?
When tested to the CAN/ULC S102.2 Standard, System 15 achieved a Flame Spread Rating of not greater than 25. Lightweight. Easy to handle. Fast installation with no special equipment required.
