What is the best lubricant for skateboard bearings?
What is the best lubricant for skateboard bearings?
We recommend Bones Speed Cream or Sabre Bearing Lube – these are skate-specific lubes that don’t protect from water ingress as well, but are specially designed for skateboard bearings and rolls much faster.
What can I use to lubricate skateboard bearings?
It’s important to use a silicone-based lubricant. WD40 or others like it will dry out your bearings and attract dust and dirt. You can pick up a bottle of Bones Speed Cream at the skate shop, or try some Prolong from the auto parts store.
How do you lubricate longboard bearings?
Remove the bearing shields and throw your bearings in isopropyl alcohol for a few hours. After they soak and get all the dirt out, take your bearings out of the solvent and let them air dry for about 30 minutes. Lastly lubricate your bearings with a tiny drop of skate lube and put the shields back on.
Can you use WD 40 on longboard bearings?
Never use WD-40 to clean your skateboard bearings. WD-40 is designed for removing rust and grime, however, it’s not a lubricant. Even though it might seem great at first, WD-40 will dry your bearings out quickly and then you need to keep reapplying it until you’re in need of new bearings.
Is White Lithium Grease good for skateboard bearings?
If the grease is formulated for wheel bearings, then lithium grease is fine. Timkin produces a bearing grease which uses lithium. They do extensive research into greases for the bearings that they manufacture. If the grease is formulated for wheel bearings, then lithium grease is fine.
Can you use motor oil on skateboard bearings?
In a pinch, motor oil or even cooking oil will work. Wd-40 is a solvent, not a lubricant. Solvents will wear away at the plastic pieces inside the bearing that make the bearing work, and will limit the life of your bearings. Olive oil is not good, but is better than nothing, and is probably better than using a solvent.
Can I use olive oil on skateboard bearings?
The Best Method. This is how you should clean your skateboard bearings, but it takes a lot of love. You will need kerosene or mineral spirits, 99 percent isopropyl alcohol and some good quality skateboard bearing lubricants. Powell Speed Cream and Rockin’ ​Ron’s Rocket Propellant are good choices.
What are the best bearings for your skateboard?
Another distinguished option are the Bones Swiss Ceramics Skateboard Bearings, which, according to the company itself, are the best the is out there. They are lighter, accelerate much faster than regular bearings, resist dirt and moisture better and thus last longer.
What is the best way to clean skateboard bearings?
Acetone , isopropyl alcohol and mineral spirits are all good options. When using solvents, wear gloves and avoid contact with your skin. Use a dish or wide-mouthed bottle as a container to soak the bearings for several minutes, occasionally swirling the bearings around in the cleaner.
What is the purpose of skateboard bearings?
Different models of skateboards come equipped with spacers for bearings. Spacers, often referred to as bearing spacers, are sometimes installed in skateboard bearing setups to increase the life and performance of your bearings. A spacer’s primary purpose is to stabilize the bearing, reducing excess movement on sharp turns and curves.
