What is the control panel on a hot tub?
What is the control panel on a hot tub?
The control system, or spa pack, is the brain of the hot tub. This nerve center controls the functions and equipment in the spa, like the jet pumps, filtration time, and heater. There are two types of control systems used in hot tubs: electronic, digital type systems and older-style mechanical air controls.
How do I get my hot tub in Standard mode?
STANDARD mode maintains your set temperature. If your spa is set for 100 degrees, any time the water drops below 100 the heater will come on and run until the water temperature reaches your set temperature. Standard mode is displayed as ST or STD on your topside control.
How long does a hot tub control panel last?
That said, most topside spa panels will last 10 years. If you have had repeated and mysterious failures to the pcb every few years, it may be a good time to replace the entire spa pack. New spa packs are less prone to circuitry problems. If your spa pack and control is over 20 years old – it’s a good time to upgrade!
What do the buttons on the hot tub mean?
Some larger hot tubs may have up to three jet buttons on the control panel that allow you to adjust the speed and strength of your jets. In most cases, pushing the button the first time will turn them on a low setting and pushing it again will increase the speed.
What does F2 on a hot tub mean?
The F2 error code is usually from a balboa power pack system and normally is referring to a flow issue in your hot tub. A dirty filter can often be the culprit here so make sure to either replace or give your hot tub filter a good cleaning. Look at your intakes and out takes and make sure they are clear of debris.
What is SL mode on hot tub?
SL: Sleep – Sleep mode will only allow the spa to heat within 20 degrees of the set temperature.
What kind of controls do you have for your hot tub?
Replacement spa control systems and packs to get your hot tub running smoothly. We have topside controls, Waterway, Hydrpquip, Balboa, and more!
What is a USC control for a hot tub?
The Universal Spa Control (USC) is a reliable spa control that fits all hot tubs and is a direct replacement for all spa brands. The USC spa pack is equipped with a 5500W (5.5kW), 4000W (4kW), or 3000W (3kW) spa heater. The USC control board can operate up to 4 water pumps.
What is a CSC hot tub heater?
The Compact Spa Control (CSC) is a reliable spa control that fits all hot tubs and is a direct replacement for all spa brands. The CSC spa pack is equipped with a 5500W (5.5kW), 4000W (4kW), or 3000W (3kW) spa heater.
What kind of power does a spa control use?
The Universal Spa Control can power spas and hot tubs all over the world with 120V, 60Hz and 240V, 50Hz single or three phase power. The USC can replace all Balboa spa controls, Gecko hot tub controls, Spa Builder spa controls, ACC spa packs, United Spas controls, Waterway digital controls and many others.
https://www.youtube.com/watch?v=6SjPyeFXLy0
