What is the density of #2 fuel oil?
What is the density of #2 fuel oil?
| Fuel | Density@15°C – ρ – | Specific Volume – v – |
|---|---|---|
| (kg/m3) | (m3/1000 kg) | |
| Fuel Oil No.23) | 810-940 | 1.1-1.2 |
| Heavy fuel oil | 800-1010 | 1.0-1.3 |
| Kerosene | 775-840 | 1.2-1.3 |
What is the viscosity of #2 fuel oil?
| Grade | *ASTM No.2 | |
|---|---|---|
| Kinematic Viscosity, mm2/s (cSt)* * | @100oC (212oF) | – |
| Saybolt Viscosity * | Universal @ 38oC (100oF) | (32.6) |
| (37.9) | ||
| Furol @ 50oC (122oF) | – |
What is the specific gravity of #2 diesel fuel?
2 diesel fuel is between 30 and 42. The specific gravity, at 60/60°F, and the density, at 15.6°C, are between 0.88 and 0.82.
What is the density of heavy fuel oil?
900 kg/m³
In the MARPOL Marine Convention of 1973, heavy fuel oil is defined either by a density of greater than 900 kg/m³ at 15°C or a kinematic viscosity of more than 180 mm²/s at 50°C. Heavy fuel oils have large percentages of heavy molecules such as long-chain hydrocarbons and aromatics with long-branched side chains.
What is the density of Jet A fuel?
775-840 g/L
Jet fuel
| Identifiers | |
|---|---|
| Density | 775-840 g/L |
| Melting point | −47 °C (−53 °F; 226 K) |
| Boiling point | 176 °C (349 °F; 449 K) |
| Hazards |
How do you calculate the density of fuel oil?
Mathematically, density, mass and volume are related according to the following formula: ρ=m/V where ρ=density, m=mass and V=volume. The density of most oils will range between 700 and 950 kilograms per cubic meter (kg/m3).
What is the density of gasoline?
800 kg/m3
While the density of gasoline is ρ = 700–800 kg/m3, it varies between ρ = 830–950 kg/m3 for diesel fuel.
What is the viscosity of heavy fuel oil?
700 mm2/s
HFO is characterized by a maximum density of 1010 kg/m3 at 15°C, and a maximum viscosity of 700 mm2/s (cSt) at 50°C according to ISO 8217.
What is the specific gravity of jet fuel?
1. Data
| Std. error | ||
|---|---|---|
| Parameter | B | |
| SG | 16.077 | 1.5771 |
| Conductivity | 0 | 0.0002 |
| S.G @ 15 °C | 2.179 | 1.2431 |
What is the density of diesel fuel?
about 0.85 kg/l
2.3. The density of petroleum diesel is about 0.85 kg/l – about 15–20% higher than the density of gasoline, which has a density of approximately 0.70–0.75 kg/l.
How do you measure the density of jet fuel?
Fuel density is usually measured with a hydrometer, which is nothing more than a glass tube with a weighted bottom that sinks to a level proportional to the density of the liquid. The hydrometer is calibrated against a scale used to determine the density for a given temperature.
How do you find fuel density?
Subtract the mass of the cylinder from the mass of the cylinder when it contains gasoline. This is the mass of the gasoline. Divide this figure by the volume, 100 ml, to get the density.
How much does jet fuel cost?
On average, aircraft fill up with an estimated 3,500 gallons of jet fuel, costing an estimated $7,070. However, price can vary from $4,040 on the low end to $14,140 on the high end.
Is jet a diesel?
Jet fuel of types A and A-1 is composed of mostly kerosene, and Jet B is a naptha-kerosene mix. Diesel gas is approx.
How much does NetJets cost?
NetJets price on the Phenom 300 starts at about $172,000 and this includes fuel fees but excludes any fuel surcharges or FET. At NetJets a 25 hour jet card on a Citation Latitude starts at about $210,000 plus FET and any fuel surcharges need to be added.
What is Jet A1 fuel?
JET A is a kerosene grade fuel, normally only available in the U.S.A. It has the same flash point as JET A1 but a higher freeze point maximum (-40 °C). It is supplied against the ASTM D1655 (JET A) specification. JET A1 is a kerosene grade of fuel suitable for most turbine engined aircraft.
