What is the difference between LAN to LAN and LAN to WAN?

What is the difference between LAN to LAN and LAN to WAN?

A LAN to WAN is called a Gateway Network. A LAN to LAN is called a Bridge Network. “A network bridge joins two otherwise separate computer networks to enable communication between them and allow them to work as a single network.

Should Ethernet be plugged into WAN or LAN?

A WAN port is used to connect the router to your broadband modem. Do I plug Ethernet into WAN or LAN? You need to connect your home network devices to the LAN ports on your router. WAN is only used to connect the router to the modem.

Where should I connect my router to LAN or WAN?

Use the LAN ports on your wireless router to connect devices on your home network, such as computers or printers. Connect the WAN port to your modem or another device hooked up to the public internet.

Can I connect LAN to LAN?

LAN to LAN – Connecting one of the main router’s ethernet port to the secondary router’s ethernet port. This type of cascading requires the main and the secondary routers to be on the same LAN IP segment to allow the computers and other devices to connect to both routers.

How do I connect two routers to a WAN LAN?

Set the Internet Gateway of router 2 to router 1’s IP address. Connect the two routers using a wired connection from any of port 1-4 in router 1 to any of port 1-4 in router 2. You can use a Wireless Media Bridge or Powerline Ethernet Kit to create a wired connection. DO NOT use router 2’s WAN port.

Do I use LAN or WAN port?

If you have a combo modem/router, then don’t use the WAN port. If your modem and router are separate, connect the WAN of your router to the modem. If you are connecting devices (computers, printers, etc.) to your router, use any of the LAN ports.

When should I use WAN port on router?

A WAN port is used to connect to an internet source, such as a broadband modem. The WAN allows the router to connect to the internet and share that connection with all the Ethernet-ready devices connected to it.

Can you have 2 routers in different rooms?

Yes, it is possible to use two (or even more than two) routers on the same home network. Conversely, a second router also helps when most clients in the home are wireless, but a few Ethernet devices in one room (like game consoles and file-sharing servers) could benefit from a wired setup.

What’s the difference between LAN and WAN ports?

A LAN port is used to connect the computers and other client machines. A WAN port is used to establish a connection with an external network like the internet.

How do I set up a LAN to WAN connection?

To make a LAN to WAN connection you need the following: Set the main router as 192.168.0.1 (for it’s main LAN address) Enable DHCP letting it give an IP address to all the devices connected to it: 192.168.0.2 – 192.168.0.255 Place a second router that comes with an RJ45 cable from the main router’s LAN port to the second router WAN port.

What is the wireless equivalent of cascading?

NOTE: The wireless equivalent of cascading is called bridging. This method is officially supported only by selected router models. For more information and instructions in setting your router as a wireless bridge, click here. i. LAN to LAN – Connecting one of the main router’s ethernet port to the secondary router’s ethernet port.

What does Lan and Wan mean on a wireless router?

If you take a look at your wireless router, you may see the abbreviations LAN and WAN, which are often next to some of the ports on the device. LAN stands for local area network, and WAN stands for wide area network.

Can I allow guest access to a cascading router?

In cascading routers, specifically LAN to LAN connections, setting the secondary router to Bridge mode would not allow access for guests. However, Guest Access is still permissible if the connections are LAN to WAN.