What is the difference between tin snips and aviation snips?
What is the difference between tin snips and aviation snips?
Standard tin snips work like levers, with one blade pivoting against the other, in much the same way as scissors. Aviation snips have a compound action which gives them a mechanical advantage over standard tin snips. This is due to the double pivot and extra linkage in their design.
What are the three different types of aviation snips?
The three main designs you will come across are: straight, left, and right cut snips, but there are other variations in their design. They are usually between 230mm and 300mm (9 inches and 12 inches) long.
What does yellow mean on aviation snips mean?
Aviation snips are color-coded to help users identify which direction they cut. Red snips cut left. Yellow snips cut straight or left and right. Green snips cut right.
Can I cut wire with aviation snips?
Aviation snips are designed for cutting sheets of material, not rounded stock. Some can be used with wire mesh or net, but they should not be used with a single wire, nails, or other cylindrical materials.
Why is it called aviation snips?
Aviation snips are so-named because they were developed to cut sheet metal in the airplane-manufacturing industry. Aviation snips are also known as compound snips because they have two pivot points instead of one. With one in each hand, walk the tools across the sheet, alternating cuts between left and right.
How do aviation snips work?
Compound snips, also called aviation snips, are color coded. Green snips are designed to cut clockwise curves and red snips to cut counterclockwise curves. If you’re left-handed, approach the cut from the opposite direction with red-handed snips (Photo 2).
What do aviation snips do?
Compound snips, also called aviation snips, are color coded. Green snips are designed to cut clockwise curves and red snips to cut counterclockwise curves. You can use the snips with either hand, but if you’re right-handed you’ll find it easier to use green snips for many types of cuts (Photo 1A).
What is right cut?
Right cut snips are for making straight cuts and cuts to the right. Straight cut snips (not shown) are for making straight cuts and shallow cuts to the right or left. Offset snips permit you to keep your hands safely above the cut while cutting directly through the centre of a large sheet.
What’s the difference between aviation snips?
Aviation snips are different from regular scissors or tin snips in that they have two pivot points. These pivot points make it easier to cut through sheets of metal with minimal effort. The snips are also spring-loaded, giving your hand extra oomph when cutting through dense metals.
