What is the first thing you do when the fire alarm goes off?
What is the first thing you do when the fire alarm goes off?
Evacuate the building to the outside and warn others of the fire on the way out. Once you have reached a safe area, call 911. Never re-enter the building. Seek out the first arriving personnel, police officer, fire fighter, EMT, and give them the specific location of the fire or smoke.
What are the five components to a fire alarm detection system?
What Are the Basic Components of Fire Alarm & Detection Systems?
- Fire alarm initiating devices.
- Fire notification devices.
- Fire alarm control panel.
- Primary power supply.
- Backup power supply.
What is a fire alarm strategy?
Fire-alarm” oversight involves selective monitoring, triggered by complaints from citizens and interest groups who bring potential problems. to legislators’ attention. The other strategy, “police-patrol” oversight, is more active, direct and centralized: legislators monitor policies to detect problems during imple-
How many stages is the fire alarm?
Depending on the type of occupancy or building height, the fire alarm system will be a single stage or two stage system. Single stage fire alarm systems require the full evacuation of a building upon alarm. Two stage fire alarm systems require an alert signal to sound before full evacuation.
What are the pass steps?
It’s easy to remember how to use a fire extinguisher if you can remember the acronym PASS, which stands for Pull, Aim, Squeeze, and Sweep. Pull the pin. This will allow you to discharge the extinguisher.
What are the 3 categories of evacuation?
Simultaneous evacuation. Vertical or horizontal phased evacuation. Staff alarm evacuation (silent alarm). Defend in place.
What is a part 6 fire alarm system?
BS 5839 part 6 provides a framework of guidance for domestic smoke alarm installations. Within the standard, a series of grades are defined, and it is these grades that are used to identify the type and scope of systems needed for domestic properties.
What is the main component of a fire alarm system?
The main components required are: Fire alarm controls. Auxiliary Radio Communication System (ARCS) control panel. Elevator controls.
What is a 3 alarm fire?
THREE ALARM FIRE A three-alarm fire call will bring triple the amount of firefighters, trucks, and equipment to the scene of the fire. Any fire alarm dispatch that goes past 2 is considered a very big fire that could take considerable time to completely extinguish.
What is the first stage alarm?
Single Stage Alarm System Follow the directions of the Fire Warden and exit the building via designated evacuation routes. 2 Stage Alarm System (buildings with over night inpatients) During stage 1, the bell will sound at a rate of 20 beats per minute.
What is 2 stage fire alarm?
Two Stage Fire Alarm System: means a fire alarm system designed so that the activation of any alarm initiating device, i.e., manual pull station, smoke or heat detector, etc., will cause an alert signal to sound to alert supervisory staff on duty about the fire emergency.
