What is the meaning of E6011?

What is the meaning of E6011?

DESCRIPTION: Pinnacle Alloys E6011 is a cellulosic electrode with penetrating characteristics designed to handle coated steels.

What is the current of 6011?

E 6011 can be used with either AC or DC current.

What is the difference between 6011 and E6011?

Why are 6011 stick electrodes not specified or not used for root passes and pipe welding in general (other than AC pipe welding)? E6010 electrodes are intended for direct current (DC) only. While E6011 electrodes can be used on alternating current (AC), as well as DC.

What is the welding amperage?

Amperage is the strength of the electrical current. Its primary effect on welding is the melt-off rate of the electrode and the depth of penetration in the base material. It is available in three different forms; DC+, DC-, and AC.

Can you weld 6011 on AC?

6011 runs on AC and direct current electrode positive (DCEP), while 6010 runs only on DCEP. This gives 6011 an advantage if you have an AC-only machine. I have found, and think most welders will agree, that 6010 runs more smoothly.

Is E6010 a low hydrogen electrode?

The term “low hydrogen” has been around for about 60 years. It was first introduced to differentiate this classification of shielded metal arc welding (SMAW) electrode (e.g., E7018) from other non-low hydrogen SMAW electrodes (e.g., E6010).

What is the best setting for 6011 welding rod?

set the dig to 50-60 for 6011 rods. 5. when welding with 7018 rods, the dig setting should be on around 30. 7018 rods are designed differently and for different applications than 6010 or 6011 and run better using a different dig setting.

Can you use 6011 on DC?

While the 6011 was specifically designed for AC machines, it can also run on DC giving it an advantage over the 6010 electrodes (which can only do Direct Current Electrode Positive). A common mistake for Stick welders is to treat their 6013 electrodes like 6011 or 6010 rods.

What do you mean by amperage?

Definition of amperage 1 : the strength of a current of electricity expressed in amperes.

Why is amperage important in welding?

Because the power increases with increased welding current, higher amperages typically result in greater weld penetration into the parent metal. High welding power also results in large, fluid weld puddles.

What is an E6011 electrode used for?

E6011 Applications & Uses The E6011 electrode is an all-purpose welding rod that can be used for repair and fabrication works. It is also applicable for welding large diameter pipelines with wall thickness of less than 12.5 millimeters. The E6011 welding rod is suitable for welding of mild steels, galvanized steels and certain low alloy steels.

How many amps does an E6011 welder use?

Like any other electrodes, the E6011 is available in various diameter sizes from 3/32” to a quarter (¼) of an inch. As the electrode’s diameter size becomes larger, the amperage increases. For example, welding horizontally a ⅛” (3.175mm) diameter rod requires 90 to 140 amps, while welding 3/16” (4.7625mm) diameter rod would require 160 to 195 amps.

What is the difference between E6010 and E6011?

If you are not an expert in 6010, you would often fail to differentiate between the 6010 and 6011. The E6010 has very strong points, and these strong points include its strengths, excellent penetration, the inherent capability to handle poor fit-up and rust, and its fast-freezing puddle.

What is E6011 flux coating?

The cellulose content in the flux coating of a cellulose electrode like the E6011 is transformed into hydrogen, carbon monoxide and carbon dioxide gas in the arc which, in turn, increases the tensile strength of the welded part. Moreover, the cellulose coating of the E6011 welding rod allows for deeper weld penetration.