What is the spacing on a 3 rail fence?

What is the spacing on a 3 rail fence?

Approximate Top Rail Height & Rail Spacing: 2 Rail: 28″ or 34″ 2″ Down and 11″ Between. 3 Rail: 3.5′ or 4′ 2″ Down and 11″ Between.

How high should a split rail fence be?

The two standard fence styles are two-rail, which stand about three feet tall, and three-rail, which stand about four feet tall. rails are commonly available in eight- and ten-feet lengths.

How do you protect a split rail fence?

Our 7 tips for maintaining your split rail fence include:

1. Use pressure-treated wood.
2. Stain the wood regularly.
3. Keep plants and grass away.
4. Use Fence Armor.
5. Choose vinyl for low maintenance.
6. Do repairs immediately.
7. Regular inspections reduce common problems.

How far apart should posts be for post and rail fence?

Prepare for Installation The parts on a mortised post-and-rail fence are prefabricated, and because of the rail lengths, the posts are usually spaced 6 feet apart and no taller than 5 feet.

How high should a 3 rail fence be?

about 4′ high
3 rail fence is about 4′ high at the top rail. 2 rail fence is about 3′ high at the top rail. Most 3 rail posts are 7′ long (A 3 rail western red cedar post is 6.5′ long).

How far apart do you put split rail fence posts?

1. PLANNING YOUR FENCE. The parts on a mortised post-and-rail fence are prefabricated, and because of the rail lengths, the posts are usually spaced 6 feet apart and no taller than 5 feet.
2. LAY OUT THE POSTS.
3. DIG THE POST HOLES.
4. PUT IN A CORNER OR END POST.
5. FILL THE HOLE WITH CONCRETE.
6. PUT IN LINE POST.
7. PUT IN MORE LINE POSTS.

Should you seal split rail fence?

Staining and sealing are crucial Every fence owner needs to keep on top of this to keep the fence safe from predators. The heat of the summer sun will dry out the wood, causing it to crack. Rain, snow and ice will soak into dry timber causing it to split or break.

Should I treat split rail fence?

Because split-rail fences are often built with untreated wood such as cedar or pine, their constant exposure to the elements may cause them to deteriorate and turn gray over time. Even if your split-rail fence is weathered and worn, it’s not too late to treat it properly and protect it from further weather damage.

Should you use concrete for split rail fence posts?

No, the hole should be filled only with the dirt that came out of the hole and tamped back in . Concrete is bad for the wood (erodes it), and gravel simply creates a porous pocket where water can collect. Well tamped soil is very stable and waterproof. Some people use concrete for gate posts for additional stability.

Where to buy split rail fence materials?

Find Split rail wood fence rails at Lowe’s today. Shop wood fence rails and a variety of building supplies products online at Lowes.com.

How to convert a wood fence panel to a gate?

Determine how wide your gate needs to be. If you have an opening in your fence for the gate,use a tape measure to measure across the opening

Use a circular saw to cut the fence panel to size. Cut between the vertical pickets of your panel–do not cut through them.

Take another wood rail,preferably one that matches the rails on your panel,and lay it diagonally across your gate.

Screw a set of hinges into the face of your gate.

Attach the latch to finish your gate. Latches are separated into two parts: a simple latch piece and a catching mechanism.

How do you paint a split rail fence?

Wash the split rail fence using a pressure washer. Begin on a low setting, and slowly increase pressure. Allow the fence to dry completely. Fill a 5-gallon bucket to two-thirds capacity with exterior latex primer. Apply primer to the split rail fence using the roller. Smooth out runs or drips with the 4-inch latex paintbrush.

What is a split rail?

Split rail fencing is a type of all-wood fence that is made without using hardware like nails, fence staples or other materials.