What is the value of resistor having a color of green blue red gold?
What is the value of resistor having a color of green blue red gold?
In the example shown here, the 4 bands are green, blue, red and gold. By using the color code chart, one finds that green stands for 5 and blue for 6. The third band is the multiplier, with red representing a multiplier value of 2 (102). Therefore, the value of this resistor is 56 · 102 = 56 · 100 = 5600 Ω.
What is the value of color blue as multiplier?
6 ×10
Resistor, capacitor and inductor
| Color | Significant figures | Multiplier |
|---|---|---|
| Blue | 6 | ×106 |
| Violet | 7 | ×107 |
| Gray | 8 | ×108 |
| White | 9 | ×109 |
What Colour codes are used to identify voltage?
120/208/240 Volt AC Wire Colors
- Phase 1 – Black.
- Phase 2 – Red.
- Phase 3 – Blue.
- Neutral – White.
- Ground – Green, Green with Yellow Stripe, or Bare Wire.
What is the value of Blue Green Red?
RGB color table
| HTML / CSS Name | Hex Code #RRGGBB | Decimal Code (R,G,B) |
|---|---|---|
| Red | #FF0000 | (255,0,0) |
| Lime | #00FF00 | (0,255,0) |
| Blue | #0000FF | (0,0,255) |
| Yellow | #FFFF00 | (255,255,0) |
What is the multiplier for color green?
Digit, Multiplier, and Tolerance Band Chart
| Color Name | Digit band | Multiplier band |
|---|---|---|
| Yellow | 4 | 10,000 |
| Green | 5 | 100,000 |
| Blue | 6 | 1,000,000 |
| Violet | 7 | 10,000,000 |
Which among the choices is the correct tolerance of color green?
The Resistor Colour Code Table
| Colour | Digit | Tolerance |
|---|---|---|
| Green | 5 | ± 0.5% |
| Blue | 6 | ± 0.25% |
| Violet | 7 | ± 0.1% |
| Grey | 8 | ± 0.05% |
Is blue wire positive or negative on a circuit?
A blue wire may be connected to negative terminal of a power source and black may be connected to positive. Additionally, is blue wire hot or neutral? Black, Red and Blue are used for hot wires and White is used as the neutral wire in a 120/208 V circuit.
What is the color of the neutral wire in electrical wiring?
The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue. IEC, DC: DC power installations, for example, solar power and computer data centers, use color coding which follows the AC standards.
What color should the ground wire be on a circuit board?
blue. US, AC: The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
What color is the brown wire on a light fixture?
Brown is your hot wire so you want to connect that to your building’s black wire. The blue is negative or return, so that will go to white. Green with yellow stripe is the ground and will go to the building green. If you are running 220 volt or more then you will probably have multiple hot wires connecting to the fixture’s brown wire and Blue Wire.
