What kind of hydraulic fluid does a Huskee log splitter take?

What kind of hydraulic fluid does a Huskee log splitter take?

The manual recommends SAE20 hydraulic fluid, so 10W-20, ISO46, or equivalent should do fine.

What is a 22 ton Huskee log splitter worth?

Huskee makes larger versions of the log splitter but after renting the 22 ton I could not find a log the splitter could not handle. So, I could not see why I needed to spend more money on a larger model. The splitter retails for around $1000. After the 10% off coupon it cost around $900.

Do you need to change hydraulic fluid in a log splitter?

To keep your log splitter splitting for many years to come, check the hydraulic fluid often. Before using your hydraulic log splitter, make sure the reservoir tank is filled. And after 100 hours of use, change out the hydraulic fluid and the filter.

How much hydraulic fluid does a log splitter hold?

Each log splitter is different in how much hydraulic fluid it takes. Most reservoirs 3.5 to 7 gallons depending on the size and power of the machine, but you should always check with your specific model’s need and manufacturer’s recommendations.

Can you mix hydraulic fluid and transmission fluid?

Transmission fluid and hydraulic fluid are both petrochemicals. They’ll mix and you’ll have a whole other fluid that will have different properties from the original two. It could be beneficial or deleterious depending on the mixture.

How do you check hydraulic fluid in a log splitter?

If you suspect there are hydraulic fluids leaking from your log splitter you can check by passing a piece of cardboard or wood underneath the damaged area. Be sure to wear work gloves and safety glasses to protect yourself from dangerous fluids.

Should I grease the beam on my log splitter?

You need to keep the ram fully greased up. Keep every square inch of it greased, because a dry ram will quickly become a rusty ram. Rusted rams will damage the hydraulic seal, and you do not want to damage the seal. If you notice rust forming, sand it off, clean it, and apply more grease.

Can you use tractor hydraulic fluid in a wood splitter?

Would tractor hydraulic fluid hurt a log splitter? No. But the pump is designed for a single viscosity – AW46 typically, AW68 in extreme hot weather, or maybe an AW32 if you’re in the arctic. A tractor hydraulic fluid is closer related to 10w30, it is fairly multi-viscosity.

How often should I change the hydraulic fluid in my log splitter?

As instructed in our manuals; you should replace the hydraulic oil in your log splitter after every 150 hours of use. First, ensure that all moving parts are entirely stopped and the log splitter is unplugged. You then unscrew the oil drain bolt with the dipstick to remove it.

Can you mix hydraulic fluid with ATF?

If you’re looking for some splashy reaction, you’ll be disappointed. Transmission fluid and hydraulic fluid are both petrochemicals. They’ll mix and you’ll have a whole other fluid that will have different properties from the original two. It could be beneficial or deleterious depending on the mixture.

How much does it cost to rent a wood splitter?

Sometimes buying and owning a log splitter is just not worth it. In this case, you may be wondering whether or not you can just rent a log splitter and how much this venture will cost you. Renting a log splitter can cost between $8 to $20 per hour. Conversely, some equipment rentals can rent log splitters for $50 to $100 per day too.

What is a hydraulic log splitter?

A log splitter is a piece of machinery or equipment used for splitting firewood from softwood or hardwood logs that have been pre-cut into sections (rounds), usually by chainsaw or on a saw bench. Many log splitters consist of a hydraulic or electrical rod and piston assembly and these are often rated by the tons of force they can generate.

What is a manual log splitter?

Manual Log Splitter. A manual log splitter is the most traditional, old fashioned way to split your firewood. No gasoline engines, no PTO from a tractor, just your energy and hard work are used to split the wood. Although this may sound tiring, new technology has helped make splitting logs by hand much easier. Manual splitters are more compact,…

What is a wood splitter?

A wood splitter, as its name implies, is used for splitting wood or logs. The split wood can be used in a variety of ways within the lumber and construction trade.

https://www.youtube.com/watch?v=Nls5nH5SUAo