What kind of snakes do plumbers use?
What kind of snakes do plumbers use?
A standard household drain snake, sometimes called a drum snake or top snake, is the smallest of the drain-clearing augers. It is primarily used for clogs in tubs, showers, bathroom sinks, washing machines, and sometimes kitchens sinks.
How long of a drain snake should I buy?
Because they are designed for the toughest of clogs, the cable should be no smaller than 5/8 inch in size, with a minimum length of 75 to 100 feet in length. This snake is designed to clean out drains that are 3 inches or larger, which typically includes clean outs to the street.
How much is a sewer snake?
Roto-Rooter prices are $225 to $500 on average to snake a drain. Drain snake rental costs $30 to $80 per day….Cost To Snake A Drain.
| Type | Average Cost |
|---|---|
| Simple Clog In Tub, Shower, Toilet, Sink, or Vent | $100 – $275 |
| Complex Clog / Main Line / Multiple Fixtures | $150 – $500 |
| Severe Clog Requiring Hydro Jetting | $250 – $800 |
How do you use a cheap drain snake?
Steps for using a drain auger
- Push the end of the snake into the drain opening and turn the handle on the drum that contains the coiled-up snake.
- Keep pushing more of the snake into the drain until you feel resistance.
- Rotate the snake against the blockage until you feel it feed freely into the pipe.
What lengths do plumbing snakes come in?
Major types of sewer cables & drain snakes
| DRAIN TYPE | PIPE SIZE | RECOMMENDED CABLE SIZE |
|---|---|---|
| BATHTUB | 1-1/2″ — 2″ | 1/4″ OR 5/16″ |
| SHOWERS | 2″ — 3″ | 5/16″, 3/8″ OR 13/32″ |
| FLOOR DRAIN | 3″ OR MORE | 3/8″, 13/32″, 1/2″, 5/8″, 3/4″ OR 0.55″ |
| FLOOR DRAIN | 4″ — 5″ | 1/2″, 5/8″, 3/4″, 0.55″ OR 0.66″ |
How do plumbers unclog pipes?
The plumber inserts the hose deep down into the drain, and then high-pressure water blasts out the nozzle to clean out all parts of the drain. The pressure is enough to completely wash away all debris clinging to the drainpipe walls, making it hard for debris to build up again.
How do you unclog a main sewer line without a snake?
How to Unclog a Main Sewer Line Without a Snake
- Step 1 – Run Hot Water.
- Step 2 – Use a Chemical Drain Cleaner.
- Step 3 – Apply the Plunger.
- Another Way – High-Pressure Water.
- If Water Goes Through It Or To It, We Do It!
