What kind of wood should I use for a planter box?
What kind of wood should I use for a planter box?
Cedar and Redwood are two of the most wood types available and you can’t go wrong with either one. Cedar is particularly favoured due to its durable, lightweight and crack resistant qualities. Redwood, on the other hand, is naturally rot resistant and has increased longevity but can be a more expensive alternative.
Can I make my own planter box?
Building a planter box from wood requires basic tools such as a saw, power drill and sander. You’ll also need screws, a screen and a paint brush. Use a fine mesh screen or landscape fabric to line the bottom of the planter screen or landscape fabric for lining the bottom of the planter.
How much does it cost to build a garden box?
A garden box kit costs $145.48 on average. Depending on the kit’s material, size, and quality, prices typically range between $104.18 and $210.46. Building a raised garden from scratch? Frame materials average around $18.39 per square foot.
Can I use pressure treated wood for a planter box?
Yes, the “new” pressure treated wood is safe for use for raised garden frames… with a few precautions! Up until 2003, the most common preservative used for pressure treated wood was chromated copper arsenate (CCA), a compound using arsenic as its primary rot protectant.
How wide should a planter box be?
Width – Planter boxes 1.5 to 2 feet wide provide space to grow vegetables in a small footprint. Narrow planters work well along a railing or fence, and as garden privacy screens, with matching trellises. Wide planters provide space to accommodate larger plants, even small trees, if you have the room.
What type of wood is needed to build a planter box?
Pressure-treated pine is also commonly used to build planters, but it has some drawbacks that natural woods do not. Pressure-treated lumber is treated with chemical preservatives to make it rot, insect and weather resistant, but these are not ideal for planters that contain edible plants such as vegetables or herbs.
How to build a vegetable garden planter box?
– Place your new planter in place and adjust the angle so that the box gets the correct amount of sun. – Line the bottom of the planter box with a single layer of river rock or pebbles. This will allow excess water to drain and keep roots from getting waterlogged. – Fill the box about 3/4 full of potting soil. – Now it’s time to plant. Follow your selected plant’s growing instructions on soil depth. – Water thoroughly. Check to be sure the box is draining well. – Consider installing a drip irrigation system in your planter to make keeping your plants well-watered more convenient.
How to make a wooden planter box?
1) Gather Tools. Building a planter box from wood requires basic tools such as a saw, power drill and sander. You’ll also need screws, a screen and a paint brush. 2) Select Lumber. Selecting the right lumber for your DIY planter project is essential. You’ll want treated or untreated wood that resists rot, mold and will last under outdoor conditions. 3) Plan and Cut Planter. The size of your finished planter is up to you. Use wood boards that are 5 to 10 inches wide. 4) Assemble Planter. The DIY planter box will have to be sturdy enough to hold plants and wet soil. It’s important that you fasten the boards together properly and securely. 5) Sand & Add Drainage Screen. Sand any rough edges on your planter box. If you’re considering a bare, natural wood look, give the planter an overall sanding. 6) Paint or Stain Planter Box. Protecting your DIY planter from moisture, mildew spores and UV damage will keep it looking its best. 7) DIY Planter Tips. Place your new planter in place and adjust the angle so that the box gets the correct amount of sun.
How to build a wooden planter?
– Mark and drill a pilot hole in the middle of the width of each end piece of the planter. – Line the boards up so that the boards with pilot holes are on the outside corners. – Fit a drill with a driving bit that will fit the screw heads. Drive each screw in through the adjoining boards. – Place the bottom board into the box. Screw the bottom to the planter box by drilling through the sides of the box. – Turn the planter over. Drill at least five drainage holes in the bottom of the box. Drill them no more than 3/4-inch wide. Space the holes evenly.
