What protocol does XBee use?

What protocol does XBee use?

Xbee is the module using Zigbee protocol. Zigbee is a wireless communication protocol like wifi and bluetooth. ZigBee defines a network layer above the 802.15. 4 layers to support advanced mesh routing capabilities.

How does XBee communicate?

XBee devices communicate with each other over the air, sending and receiving wireless messages. However, they can communicate with intelligent devices via the serial interface. XBee devices transmit data coming from the serial input over the air, and they send anything received wirelessly to the serial output.

Is Zigbee serial communication?

So, basically, Xbee modules are capable of two types of communication – wireless communication and serial communication.

Is XBee the same as Zigbee?

XBee is a family of radio modules and is a registered trademark of Digi International. Zigbee is a wireless communications protocol and a registered trademark of the Zigbee Alliance. XBee is a brand name that refers to a family of devices from Digi International.

Does XBee use Zigbee?

“ So basically XBee is Digi’s own Zigbee based protocol. In layman’s term they are wicked cool, and fairly easy to use wireless modules. Zigbee – An alliance and a standard of cost and energy efficient mesh networks. XBee uses the Zigbee standard and adds to it and wraps it up in their own neat little package.

What is XBee RF module?

Digi XBee is more than a module. It’s a complete ecosystem of RF modules, gateways, adapters, and software, all engineered to accelerate wireless development for global deployments. One socket allows you to connect to IoT networks around the globe.

How far can XBee communicate?

Overview. The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight).

What is Xbee Arduino?

Overview. The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on the Xbee module from MaxStream. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). The shields breaks out each of the Xbee’s pins to a through-hole solder pad.

Can Zigbee transfer file?

Currently, files can be transferred correctly in the range of wireless network except the base station occurs some problems which may cause network paralyzed. Although ZigBee owns some defect such as low bandwidth and transmission rate, the file whose data amount is not large could correctly transfer in this network.

What’s better Zigbee or Z Wave?

ZigBee operates at 2.4 GHz compared to the 908 MHz of Z-Wave. The higher frequency allows ZigBee to transmit more data but reduces the range of the signal. A Z-Wave signal between two nodes can travel up to 330 feet in an outdoor, unobstructed setting.