What should we be aware of when miking an acoustic guitar?
What should we be aware of when miking an acoustic guitar?
Each microphone should be 90º to each other. We recommend placing the mics around where the neck meets the body of the guitar. One of these mics will pick up the top end of the neck and the other will pick up the warmth of the body. In the mixing process you wouldn’t pan these as extremely as the spaced pair.
Can you use an SM57 for acoustic guitar?
The Shure SM57 is a very capable microphone for recording an acoustic guitar. Its ability to eliminate unwanted noise make it a good choice to capture the acoustic guitar’s clarity and detail. Condenser microphones are the best option for acoustic guitar, but with care an SM57 can work well.
What is off-axis noise?
Refers to an audio source that is not directly in front of a transducer, especially a microphone. This results in off-axis coloration; a distortion or change in the frequency response of the reproduced audio signal.
How do I record my acoustic guitar well?
Top Ten Tips for a Great Acoustic Guitar Recording
- Use a condenser microphone.
- Avoid too much bass.
- Be aware of the sweet spot.
- Use New Strings.
- Record Direct.
- First Fret Brilliance.
- Record in Stereo.
- Double-track with different mic techniques.
What is difference between on-axis and off axis?
on-axis means that the speaker is basically pointing straight at you, off-axis means the speakers are facing each other ( in most applications ) so people will sometimes put the tweeters in the A-pillars, if they have them “on-axis” with the driver seat, when sitting in the driver seat you would be looking straight on …
At what degree is the microphone on-axis located?
180 degrees
To select the rear sound for a particular mic model set the “Axis” control to 180 degrees, and as always let your ears be your guide.
What is the difference between on axis and off axis?
On-axis basically means pointing the mic directly at the speaker with no angle, so in effect, the mic would be considered to be perpendicular to the front of the cab. Off-axis means angling the mic a little to the side.
What is on axis and off axis?
What is the best position to Mic an acoustic guitar?
There is a go-to focal point that serves as the target for almost all acoustic guitar mic techniques. That spot is where the neck and the body come together, usually the 12th or 14th fret, depending on guitar style. The bottom of the neck — the side of the high E-string — is the preferred starting point.
Why is it so hard to capture acoustic guitar ambience?
There’s often an air of reality to natural ambience that’s very difficult to capture with a plug-in. Mic placement is the second location consideration. There is a go-to focal point that serves as the target for almost all acoustic guitar mic techniques.
Does dynamic range matter when recording an acoustic guitar?
Yet, there are advantages in dynamic range that make recording with low noise easier with higher bit rates. Even a moderately trained ear can sense the difference in richness with a 96kHz sampling rate, even after dithering. While the change is subtle, everything about recording an acoustic guitar is subtle.
Should you use a condenser or a dynamic microphone for acoustic guitar?
Limit your microphone options to condensers. Dynamic mics do many things well, but when it comes to acoustic guitars, they aren’t in their element. Dynamic diaphragms can’t capture the delicate subtleties of an acoustic guitar’s rich top end. A condenser diaphragm responds in a much more appropriate way.
