What size are MGB wheels?
What size are MGB wheels?
SPECIFICATIONS
| DIAMETER | 626 mm / 24.64″ |
|---|---|
| WIDTH | 167mm / 6.5″ |
| RIM SIZE | 4.0″ 4.5″ 5.5″ |
| SPEED | H = 130 mph / 210 km/h |
| TUBES | Michelin 14D13 |
What size tires are on a MGB?
| MGB GT | |
|---|---|
| Dimensions | |
| Wheelbase | 2,312 mm (91.0 in) |
| Length | 3,886 mm (153.0 in) 4,019 mm (158.2 in) rubber bumper version |
| Width | 1,524 mm (60.0 in) |
Are Blockley Tyres any good?
Conditionally recommended: Avon & Blockley Positive qualities included very good safety reserves in the aquaplaning test as well as balanced driving behaviour on dry surfaces (Blockley), and a “precise steering behaviour, balanced driving behaviour and short braking distances on dry road surfaces” (Avon).
What size are Rostyle wheels?
Ford also used the Rostyle, in 13 x 5-inch form, on their charming ‘European Mustang,’ the first-generation 1969-1974 Capri. This wheel was found on the sporty Sunbeam H120 coupe in 1968, and a tiny 10 x 4.5-inch version enhanced the 1969 Morris Mini 1275GT.
Who made Magnum 500 wheels?
These Magnum 500 wheels are manufactured by Specialty Wheel right here in the USA. There are other Magnum 500 wheels for sale built elsewhere in the world, but these premium wheels are built in California using modern tooling and high strength steel.
Will Dunlop D60 A2 jlbs fit on MGB?
If you have aftermarket wheels on your MGB, and specifically if the rim is wider than stock, then you have quite a bit more selection of tires. I have a set of “Dan Gurney Victory Mags” on my MGB which are 6″ wide, and therefore I could fit Dunlop D60 A2 JLBs in 195/60R14.
What size tires did the BGT and B use?
I’ve seen articles that state that the BGT used 165 and the B used 155 tires, but I don’t see any proof of this, as the part number charts I have show the same speedometer fitted to the B and BGT. If they had different sized tires, they would require different speedometer gearing ratios.
How do I know what size my Wheels are?
There are four important measurements that are used to categorize and identify a wheel for fitment purposes. Rim Diameter The actual diameter of the wheel at the point where the tire bead seats ( NOT the outer lip of the rim). Rim Width Measure from the inside of the outer lip at the bead seating point to the inner lip.
What is the width of a rim?
Rim Width = Steel 5J/ Wire (60 spokes) 4.5J Offset = 22mm approximately. As per B/BGT but using a steel/alloy structure Dunlop rim. Offset = 22mm approximately. Radial or earlier, Cross-ply 165 14 (usually implies an 80% tyre wall height) which gives a rolling diametre of 620mm (24.39″)
