What size is a 1350 on a yoke?
What size is a 1350 on a yoke?
The 1330 to 1350 U Joint cross width is 3.625 (3 5/8”) on both sides, while the cap diameters are different. 1 1/16″ on the 1330 side and 1 3/16″ on the 1350 side.
What is a shirt yoke width?
Otherwise known as the yoke width, you can measure the shirt shoulder width by taking a buttoned up shirt, flat on the floor, and measure on the back, the point from where the yoke meets the sleeve, straight over to the same point on the other side.
How strong is a 1350 U-joint?
The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque.
How much power can a 1350 U-Joint handle?
2,200 lb-ft
The 1350 U-joint is rated for 2,200 lb-ft (minimum elastic limit) of torque. While the 1310 series, the stock size for most Jeeps, is rated for 1,600 lb-ft of torque.”
Is the QP 1350 yoke worth it?
Great value 1350 yoke! Great yoke, great pre-sales support, quick shipping…just what I’ve come to expect from the folks at QP. FWIW, my yoke did not include the seal shield as pictured, but I remove those anyway so they don’t get pushed into the seal and risk tearing it up when I’m wheeling.
What is the difference between 1410 and 1350 U-joints?
1350 U-Joint Series is used on trucks mostly for OE. It is also a Hi-Performance upgrade on cars. 1.188 cap and 3.622 width. (1 3/16 x 3 5/8) 1410 U-Joint Series is on 3/4 and 1 Ton or larger trucks. 1.188 cap and 4.187 width. (1 3/16 x 4 3/8) Back to Top Inside Lock U-Joints by Series
What size cap do you put on a pinion yoke?
The pinion yoke on the left is a standard cap at 1 1/16 and has the correct U-Joint cap. The yoke on the right is a BC (Big Cap) and requires a 1.125 cap. A standard 1 1/16 cap is in it and it fits loose. A paper clip is inserted in one edge to illustrate the amount of play.
What is the size of a you joint on a truck?
1410 U-Joint Series is on 3/4 and 1 Ton or larger trucks. 1.188 cap and 4.187 width. (1 3/16 x 4 3/8) Inside Lock U-Joints are measured from the grooves in the caps where the C-clips fit not the overall width of the U-Joint like the outside lock type. On the left is a Pinion Yoke and UJ for inside lock. The C-clips are facing up to photograph.
