What size is a 7mm drill bit?

What size is a 7mm drill bit?

Metric Tap and Drill Bit Size Table

Tap	Metric Drill	US Drill
6mm x 1.0	5.2mm	–
7mm x 1.0	6.1mm	15/64″
8mm x 1.25	6.9mm	17/64″
8mm x 1.0	7.1mm	–

What size is a 1/8 drill bit in MM?

Fractional inch drill bit sizes

Drill size	Diameter (in)	Diameter (mm)
3/32 in	0.0938	2.3813
7/64 in	0.1094	2.7781
1/8 in	0.1250	3.1750
9/64 in	0.1406	3.5719

Are there metric drill bits?

The only difference between drill bits found in the U.S. and metric drill bits is that metric drill bits are measured in the metric system. Instead of finding a 1/4-inch bit, you’ll find a 6-milimeter bit. Nowadays, even the imperial measurements of drill bits in the U.S. have the metric size specified on the package.

What size is #8 drill bit?

1/8″
Drill Bit Sizes For Pre-Drilling For Screws Most Commonly Used Sizes In Bold

Screw Size	Pilot hole size for hardwoods*	Pilot hole size for softwood**
#5	5/64″	1/16″
#6	3/32″	5/64″
#7	3/32″	5/64″
#8	1/8″	3/32″

What size is a 3/16 drill bit in MM?

Drill Bit Hole Diameters
Metric Size	Fractional Size
3 mm	.1181	3/16
4 mm	.1575	13/64
5 mm	.1968	7/32

What size is a 6 mm drill bit in standard?

6mm is 0.2362198 inches. 15/64 is 0.234 inches.

What size is 6mm drill bit?

Metric Tap and Drill Bit Size Table

Tap	Metric Drill	US Drill
5mm x 0.8	4.3mm	–
6mm x 1.0	5.2mm	–
7mm x 1.0	6.1mm	15/64″
8mm x 1.25	6.9mm	17/64″

What is a 6 mm drill bit?

6mm is 0.2362198 inches. 15/64 is 0.234 inches. That’s about as close as you can get in fractions.

What size is a number 7 drill bit?

0.2010 inches
A number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.

What is equivalent to a 7/16 drill bit?

Drill Bit Hole Diameters
Metric Size	Fractional Size
17 mm	.6693	13/32
18 mm	.7087	27/64
19 mm	.7480	7/16

What size is 8mm drill bit?

What size is a 7 32 drill bit?

Drill Bit Hole Diameters
Metric Size	Fractional Size
4 mm	.1575	13/64
5 mm	.1968	7/32
6 mm	.2362	15/64